Spatial Distribution of Gas Temperature Measured using Laser Interferometer on a Surface Discharge Ozonizer
スポンサーリンク
概要
- 論文の詳細を見る
The spatial distribution of gas temperature was measured on a surface discharge ozonizer. It was measured using the Michelson interferometer with a He–Ne laser. The ozonizer has a configuration of a thin dielectric plate (Al2O3) put between a stripe shaped high-voltage electrode and a grounded electrode. In this experiment, oxygen gas with a flow rate of 1.5 L/min was used for ozone generation, and an ozone concentration of 610 ppm was obtained at a discharge power of 0.8 W. At the same time, the maximum increment of average gas temperature was approximately 2°C at a distance of 2.2 mm from the surface of the ozonizer elements.
- INSTITUTE OF PURE AND APPLIED PHYSICSの論文
- 2004-01-15
著者
-
Yamabe Chobei
Department Of Electrical And Eiectronic Engineering Faculty Of Science And Engineering Saga Universi
-
Ihara Satoshi
Department Of Electrical And Electronic Engineering Faculty Of Science And Engineering Saga Universi
-
Yamabe Chobei
Department of Electrical and Electronic Engineering, School of Science and Engineering, Saga University, 1 Honjo-machi, Saga 840-8502, Japan
-
Ihara Satoshi
Department of Electrical and Electronic Engineering, School of Science and Engineering, Saga University, 1 Honjo-machi, Saga 840-8502, Japan
関連論文
- Meningeal Melanocytoma Extruded From the Skull of a Neonate : Case Report
- Biological Application of Capillary Discharge in Water
- Modification of Hydroxyapatite Crystal Using CO_2 Laser : The Preliminary Study for FEL Application in Biological Field
- Nitrogen Addition Effect for Ozone Zero Phenomena on Ozone Generation with Rotating Electrode
- Ozone Generation Characteristics of Ozonizer with the Rotating Type Electrode
- Studies on Electrical Discharge Effects in a Foaming Environment : Nuclear Sciences, Plasmas, and Electric Discharges
- Plasma Opening Switch Using Plasmas Produced by a Pulsed CO_2 Laser
- Characteristics of a TEA-CO_2 Laser Oscillation by an Inductive Energy Storage Pulsed-Power Generator
- TEA-CO_2 Laser Oscillation by Inductive Energy Storage Pulsed Power Generator
- Spatial Current Distribution Inside the Switch Region of a Plasma Opening Switch with Coaxial Configuration
- Influence of Humidity and CO_2 Additions on NOx Treatment Efficiency by DC Streamer Corona
- NO_x Treatment by Electrical Discharge Techniques
- Improved Performance of Discharge-Pumped XeCl Laser Using Ar/He Diluent
- A Study on Mask Type Stereo-Lithography with XeCl Excimer Laser
- Evaluation of Weakly Ionized Plasma Channel by Accumulation Effect of Charged Particles Using High-Repetition-Rate KrF Excimer Laser
- Treatment of Fluorocarbon Using Nonthermal Plasma Produced by Atmospheric Discharge
- Treatment of Volatile Organic Compound by Positive Streamer Corona Using Series Gap : Nuclear Science, Plasmas, and Electric Discharges
- Investigations on the Rotating Electrode Effect on the Ozone Generation Process in a Plate Ozonizer
- Ozone Generation by a Discharge in Bubbled Water
- Spatial Distribution and Characteristics of Ozone Generation with Glow Discharge using a Double Discharge Method
- Interaction of TEA CO_2 Laser Light with Laser Produced Plasma
- Characteristics of the Double Discharge TEA CO_2 Laser
- Higher Harmonics in Backscattering of Lasar Light from the TEA CO_2 Lasar-Poduced Plasma
- Adding Effect of Xylene in TEA Double Discharge CO_2 Laser
- Gain Measurements of Matrix-Type TEA CO_2 Laser
- Self-Mode Locking of TEA CO_2 Laser with Helical Pumping
- A study on mask type stereo-lithography with XeCl excimer laser
- A Positive Streamer Generation with a Wire-to-plane Electrode and An Effect of a Superposition of Positive Streamer and Surface Discharge on Ozone Generation
- Fundamental Studies of Ozone Generation and Its Characteristics Using New Type of Ozonizer ( Plasma Processing)
- Fundamental Studies of Ozone Generation and Its Characteristics Using a New Type Ozonizer
- A TEA-CO_2 LASER OSCILLATION BY AN INDUCTIVE ENERGY STORAGE PULSED POWER SYSTEM
- Characteristics discharge and emission in Ar gas using the API plasma electrode
- Aneurysm and Fenestration of the Azygos Anterior Cerebral Artery : Case Report
- Positive DC Corona Discharge in N_2-NO-CO_2-O_2 Mixtures(Nuclear Science, Plasmas, and Electric Discharges)
- TEA-CO_2 Laser Oscillation by Inductive Energy Storage Pulsed Power Generator
- Discharges in Water and Applications to Wasted Water Treatment
- Power Transmission by Using Laser Beams
- The Application of Electric Shock as a Novel Pest Control Method for Apple Snail, Pomacea canaliculata (Gastropoda : Ampullariidae)
- The positive effect of the electrode rotation on the ozone generation process
- Improvement of a Corona-Preionized TEA-CO_2 Laser by Means of High-Frequency Corona Discharge
- Navigation-Guided Endoscopic Biopsy for Intraparenchymal Brain Tumor
- Acute Subdural Hematoma Without Subarachnoid Hemorrhage Caused by Ruptured A1-A2 Junction Aneurysm : Case Report
- Removing Fats, Oils and Greases from Grease Trap by Hybrid AOPs (Ozonation and Sonication)
- Removing Fats, Oils and Greases from Grease Trap by Hybrid AOPs (Ozonation and Sonication)
- Spatial Distribution of Gas Temperature Measured using Laser Interferometer on a Surface Discharge Ozonizer
- Breaking of Ice Sheets Using Shock Waves Produced by Pulsed Power
- Ozone Generation Characteristics by Superimposed Discharge in Oxygen-Fed Ozonizer
- Multimodality Treatment for Cerebral Arteriovenous Malformations : Complementary Role of Proton Beam Radiotherapy
- Investigations on the Rotating Electrode Effect on the Ozone Generation Process in a Plate Ozonizer
- Spatial Distribution of Gas Temperature Measured using Laser Interferometer on a Surface Discharge Ozonizer