A Study of Wear of Spray Nozzle Tip in the Case of Fuel DME (Dimethyl Ether)
スポンサーリンク
概要
- 論文の詳細を見る
The possibility of wear reduction to the injector needle and of fuel rduction leakage from the injector is examined by using fatty acids and polymer type additives. The newly developed wear test equipment is used because of the implementation of an actual injector and DME as a fuel. A HFRR (High Frequency Reciprocating Rig) is also used to select a suitable concentration of additive. In this case, ETBE is used as a fuel instead of DME because of the similar SP value of DME. The concentration of fatty acids at around 300 ppm satisfies the recommended value (WSD<460μm) for diesel fuel. However there is some wear at the needle tip despite no evidence of wear at needle guiede. Therefore, the blend of fatty acid and polymer type additives is used to improve the wear resistance and increase the viscosity of DME to prevent a leam from the injector. As a result, the blend additives are effective for reducing wear at the needle tip and decreaing the possibility of leakage to almost nothing from the injector.
- 公益社団法人 自動車技術会の論文
公益社団法人 自動車技術会 | 論文
- 歩行者検出のためのミリ波レーダの注視制御
- Analysis of Vehicle Dynamics to Steering Wheel Torque on the On-center
- LPG燃料ポンプシステムのスライディングモード制御
- In-vehicle Effect Measurement for a System to Prevent Dangerous Driving
- モデルベース制御のためのディーゼルエンジン構成要素のモデリング―吸気系モデルの構築と予測精度の検証―:—吸気系モデルの構築と予測精度の検証—