低合金鋼平板の溶接残留応力に及ぼす溶接条件および溶接後熱処理条件の影響
スポンサーリンク
概要
- 論文の詳細を見る
Welding residual stress profiles of low alloy steel JIS SQV2A could be predicted by thermal elastic plastic analysis taking account of the phase transformation strain. Residual stress relaxation during post-weld heat treatment (PWHT) could be also predicted by creep analysis. Effects of welding and PWHT conditions were examined, such as heat input efficiency, preheating temperature and PWHT holding temperature and time on residual stress profiles. The effects of heat input efficiency and preheating temperature in welding conditions were found to be remarkable on the stress distribution for the thermal elastic plastic analysis taking account of the phase transformation strain. The effect of temperature in PWHT conditions was also found to be remarkable on the stress distribution for the creep analysis. However, the effect of holding time was not found. Since the creep rate was fast for large residual stress, creep strain was suggested to saturate during rising temperature period. The accuracy of these analytical results was validated by temperature measurement during on bead welding and residual stress measurement using strain release method after welding and PWHT.
著者
関連論文
- Ni基合金溶接金属をクラッド溶接した低合金鋼異材部の残留応力解析
- OS1415 高温化におけるNi基合金平板突合せ溶接継手の延性破壊強度(エネルギー機器の経年劣化に関する健全性評価,オーガナイズドセッション)
- 809 多パスビード溶接部の溶接直後急冷法による残留応力改善(材料強度と構造設計)
- GS0706 平板試験体を用いたNi基合金溶接部の破壊評価手法に関する検討(GS07-02 接着・接合2,GS07 接着・接合)
- 348 差込継手の残留応力分布に及ぼす斜角構造の影響(OS10-3 照射劣化,溶接部評価,OS10 エネルギー機器の経年変化に関する健全性評価手法の開発とその適用(2))
- 338 容器貫通部の応力拡大係数に及ぼす斜角構造の影響(OS10-2 応力拡大係数,確率信頼性,OS10 エネルギー機器の経年変化に関する健全性評価手法の開発とその適用(1))
- 低合金鋼平板の溶接残留応力に及ぼす溶接条件および溶接後熱処理条件の影響
- 原子炉圧力容器炉底部モデルによる残留応力計測健全性評価