Damage Assessment of Low-Cycle Fatigue by Crack Growth Prediction (Development of Growth Prediction Model and Its Application)
スポンサーリンク
概要
- 論文の詳細を見る
In this study, the fatigue damage was assumed to be equivalent to the crack initiation and its growth, and fatigue life was assessed by predicting the crack growth. First, a low-cycle fatigue test was conducted in air at room temperature under constant cyclic strain range of 1.2%. The crack initiation and change in crack size during the test were examined by replica investigation. It was found that a crack of 41.2 μm length was initiated almost at the beginning of the test. The identified crack growth rate was shown to correlate well with the strain intensity factor, whose physical meaning was discussed in this study. The fatigue life prediction model (equation) under constant strain range was derived by integrating the crack growth equation defined using the strain intensity factor, and the predicted fatigue lives were almost identical to those obtained by low-cycle fatigue tests. The change in crack depth predicted by the equation also agreed well with the experimental results. Based on the crack growth prediction model, it was shown that the crack size would be less than 0.1 mm even when the estimated fatigue damage exceeded the critical value of the design fatigue curve, in which a twenty-fold safety margin was used for the assessment. It was revealed that the effect of component size and surface roughness, which have been investigated empirically by fatigue tests, could be reasonably explained by considering the crack initiation and growth. Furthermore, the environmental effect on the fatigue life was shown to be brought about by the acceleration of crack growth.
著者
関連論文
- SM490鋼の弾塑性破壊じん性に及ぼす塑性ひずみの影響
- 複数き裂の相互作用を考慮した進展予測方法（長さの異なる表面き裂の繰返し引張および曲げ荷重下での進展）
- EBSDによる低サイクル疲労損傷の観察（SUS316鋼およびSTS410鋼の微視組織的変化）
- 変動荷重下における316ステンレス鋼の疲労寿命予測（寿命の支配因子と2段2重試験における損傷評価）
- 外表面ひずみ測定による内表面き裂の成長モニタリング（その２：多点ひずみ測定法による疲労き裂進展のモニタリング）
- 外表面ひずみ測定による内表面き裂の成長モニタリング（その１：多点ひずみ測定法の提案）
- 近接した軸方向き裂に対する破壊評価のための合体基準
- Damage Measurement of Structural Material by Electron Backscatter Diffraction (Quantification of Measurement Quality toward Standardization of Measurement Procedure)
- 316ステンレス鋼の疲労強度に対する平均応力効果
- Damage Assessment of Low-Cycle Fatigue by Crack Growth Prediction (Development of Growth Prediction Model and Its Application)
- Effect of Plastic Strain on Elastic-Plastic Fracture Toughness of SM490 Carbon Steel (Assessment by Stress-Based Criterion for Ductile Crack Initiation)
- Limit Load Analysis Method for a Pipe with an Axial Shallow Flaw
- EBSD解析によるステンレス鋼の疲労損傷検出（TEM観察との比較）
- クラス2, 3配管に対する弾性塑性破壊力学評価のための荷重割増し係数（Z係数）
- EBSD解析によるステンレス鋼の疲労損傷検出（結晶粒界に着目した解析）
- 3次元デジタル画像相関法による溶接部における不均一強度分布の同定
- 等二軸疲労のための膜圧式疲労試験装置の開発