Development of Tool Edge Temperature Measurement Method in Wet Cutting

スポンサーリンク

概要

• 論文の詳細を見る

• In this paper, the measurement method of tool edge temperature using a two-color pyrometer with an optical fiber in wet cutting is proposed. Using the proposed method, the high pressure air supplied from the small hole where an optical fiber is inserted prevents coolant from adhering to the optical fiber edge and makes temperature measuring possible. The influence of this supplied air pressure on the tool edge temperature is negligible in the 0.05Mpa to 0.6MPa range. In this way, the temperature of CBN and PCD tool edge is measured in wet cutting of Ti-6Al-4V. As a result, the tool edge temperature increases rapidly with the increase of cutting speed. In dry cutting, PCD tool edge temperature is almost 100 °C lower compared with CBN tool edge temperature. By coolant supply, PCD tool edge temperature decreases greatly. For example, when cutting speed is set at 300m/min, PCD tool edge temperature decreases by 350°C, while CBN tool edge temperature decreases by only 70°C.

著者

• Tanaka Ryutaro

  Graduate School Of Natural Science And Technology Kanazawa University

• UEDA Takashi

  Institute of Science and Engineering, Kanazawa University

• Hosokawa Akira

  Institute Of Science And Engineering Kanazawa University

• Furumoto Tatsuaki

  Institute Of Science And Engineering Kanazawa University

• Ueda Takashi

  Institute Of Molecular And Cellular Biosciences University Of Tokyo

• NISHIMOTO Hideto

  Graduate School of Natural Science and Technology, Kanazawa University

関連論文

• E23 Laser Sintering Characteristics of Metallic Powder with Yb Fiber Laser : Optimization of Processing Conditions about Laser irradiation(Laser processing)
• C13 Finishing of Inner Wall of Cooling Channel in Mold by High Speed Flowing(Abrasive finishing technology)
• Hardmilling with CBN and Coated Tools(Advanced machining technology (continued))
• E22 Study on Cleaving Mechanism of Silicon Wafer by Laser Beam Irradiation(Laser processing)
• The Biological Roles of Small GTPases and interacting Proteins in Plants
• RNA-Binding Protein Hoip Accelerates PolyQ-Induced Neurodegeneration in Drosophila
• Pre-Groove Development for Laser Cleaving of Brittle Materials by Using Micro-Lens
• Development of Tool Edge Temperature Measurement Method in Wet Cutting
• Wear Characteristics of Ceramic Tools When Turning BN Free-Machining Steel
• Analysis of Cutting Behavior during Tapping and Measurement of Tool Edge Temperature Measured by a Two-Color Pyrometer

スポンサーリンク