フラフープを用いた機械構造物の制振(鉛直方向振動と水平方向振動の比較,および制振効果)
スポンサーリンク
概要
- 論文の詳細を見る
This paper deals with the vibration quenching of mechanical structures using a Hula-Hoop. Quenching of vertical vibration of the one-degree-of-freedom system forced by centrifugal force is compared with that of horizontal one. Following was made clear from the numerical analysis: (1) The device using Hula-Hoop is very effective for not only horizontal vibration quenching but also vertical one in the region exceeding the resonant frequency. (2) On the vibration quenching problem in the vertical vibration, if there is the parametric excitation relation between the Hula-Hoop and the main system, the Hula-Hoop moves as pendulum in the region near resonance frequency and quenching the main system is possible. However, if the mass of Hula-Hoop is light, the quenching by autoparametric excitation is not enough. (3) The smaller the damping of the hula-hoop is, the more the vibration of main system is quenched. (4) In the vibration quenching problem using Hula-Hoop, the larger the mass of the Hula-Hoop is, or the longer the length between rotational center and gravity center of the Hula-Hoop is, the more effective the Hula-Hoop is. (5) It is suggested that the system with essentially large unbalance may be quenched in large frequency region using autoparametric excitation and rotation of Hula-Hoop.
著者
-
吉武 裕
長崎大学大学院工学研究科
-
原田 晃
長崎大学大学院工学研究科
-
清水 亮佑
長崎大学大学院生産科学研究科
-
梶原 修平
三井造船(株)
-
濵田 知宏
ヤマハ発動機(株)
-
柴原 文高
三菱重工(株)
関連論文
- フラフープを用いた制振装置(機械力学,計測,自動制御)
- 二本の梁の衝突振動(機械力学,計測,自動制御)
- 多段歯車系の歯打ち現象における駆動トルクの高次成分の影響(機械力学,計測,自動制御)
- 多段歯車系の係数励振(機械系における非線形力学と解析法)
- 梁の衝突振動における分岐現象と減衰の影響(機械力学,計測,自動制御)
- 多段歯車系の歯打ち現象(機械力学,計測,自動制御)
- 機械工学年鑑(1995年)機械力学・計測制御
- 歯打ちの基礎的研究 : かみ合い剛性変動と駆動トルクの高次成分の影響(機械力学,計測,自動制御)
- 2スロット発電機と水平振り子からなる動吸振器型制振発電装置の研究 : 第1報,渦励振の制振(機械力学,計測,自動制御)
- 3. 非線形振動 (機械工学年鑑(1995年)機械力学・計測制御)
- フラフープを用いた機械構造物の制振(鉛直方向振動と水平方向振動の比較,および制振効果)
- フラフープとアシストモータを用いた制振
- 動吸振器による電動機固定子の制振
- Impact Vibration of Strongly Unsymmetrical Beams (Sub-Harmonic Vibrations Including Internal Resonance)
- 歯形誤差と歯剛性変動を考慮したはすば歯車対の歯打ちにおける非線形振動
- ガウル教授(Prof. Lothar Gaul)特別講演によせて