高強度鋼の超高サイクル域における疲労寿命推定
スポンサーリンク
概要
- 論文の詳細を見る
Three kinds of fatigue failure mode are appeared in a S-N curve of high strength steel depending on applied stress amplitude level, such as surface inclusion induced failure mode in high stress amplitude level and short fatigue lifetime, subsurface inclusion induced failure mode without GBF area and that with GBF area in low stress amplitude level and high and/or very high cycle fatigue (VHCF) regime. Fatigue life in the VHCF regime is controlled by formation of the GBF area. Method to predict the fatigue lifetime and/or S-N curve of high-strength steels in the VHCF regime was discussed. It was assumed in this study that small fatigue crack growth in the GBF area was followed by Paris power law. It was shown that there was a linear relationship in the double logarithmic diagram between value of exponent, m, and constant, C, in the power law obtained from the S-N data of some high-strength steels tested under rotating bending and axial loading condition. Also, the exponent, m, showed the linear relationship with the Vickers hardness of the materials in double logarithmic diagram. Based on these experimental facts, new prediction of fatigue lifetime in the VHCF regime was proposed in form of Basquin's equation. Predicted fatigue lifetime and experimental result accorded well together, as compared to the prior proposed predictions.
著者
-
魯 連涛
西南交通大
-
塩澤 和章
福井工業大学工学部機械工学科
-
島谷 祐司
(株)不二越マテリアル事業部
-
村田 将一郎
日機装(株)
-
李 思曾
近藤設備設計(株)
-
魯 連涛
西南交通大学牽引動力国家重点実験室
-
塩澤 和章
福井工業大学
-
塩澤 和章
福井工業大学工学部
関連論文
- 2025 高炭素クロム軸受鋼Gcr15の超高サイクル疲労特性(S11-1 高強度鋼・高硬度鋼の超高サイクル疲労,S11 金属材料の超高サイクル疲労特性の解明)
- K-0525 高炭素クロム軸受鋼の超長寿命疲労挙動に及ぼす二段荷重変動の影響(S04-3 高強度鋼の超高サイクル疲労(2))(S04 金属材料の組織と疲労強度信頼性)
- 高炭素クロム軸受鋼のS-N曲線と内部き裂発生挙動(疲労)
- 308 高速度工具鋼SKH51の超長寿命疲労挙動と破壊形態(OS1-1 高強度材の超高サイクル疲労(1))(OS1 高強度材・表面改質材の疲労と破壊)
- 230 超長寿命疲労における破壊モードの遷移に関する一考察(OS3(3) 疲労初期損傷および疲労き裂発生)
- トポグラフィ破面解析による高強度鋼の内部疲労き裂発生・進展機構に関する研究(疲労)
- 高速度工具鋼SKH51の超長寿命域の疲労挙動に及ぼす表面処理の影響
- 626 高炭素クロム軸受鋼の超長寿命疲労強度に及ぼす表面層の影響(超長寿命疲労特性)(一般セッション)
- 高速度工具鋼SKH 51の超長寿命疲労挙動と破壊形態
- 高炭素クロム軸受鋼の超長寿命疲労挙動に及ぼす二段二重変動荷重の影響と内部き裂進展挙動
- 322 高速度工具鋼の超長寿命疲労強度特性に及ぼす表面処理の影響
- 高炭素クロム軸受鋼の超長寿命疲労強度に及ぼすショットピーニングの影響
- 634 高炭素クロム軸受鋼の超長寿命疲労強度特性に及ぼす表面処理の影響
- 119 高炭素クロム軸受鋼の超長疲労寿命に及ぼすショットピーニングの影響
- 105 高炭素クロム軸受鋼の超長寿命疲労特性に関する特徴的実験結果
- 展伸マグネシウム合金の低サイクル疲労変形挙動と疲労寿命評価
- 706 超高サイクル域における高強度鋼の疲労寿命推定法(高サイクル疲労特性,疲労損傷観察ならびに強度評価,オーガナイスドセッション1)
- 高強度鋼の超高サイクル域における疲労寿命推定
- 高速度鋼の超高サイクル疲労強度特性に及ぼす荷重負荷様式の影響
- 展伸マグネシウム合金の超高サイクル疲労強度特性に及ぼす微粒子ショットピーニング処理の影響
- OS2018 マグネシウム合金押出し材の応力及びひずみ制御低サイクル疲労変形挙動と疲労寿命評価(OS20-4 疲労と強度,OS-20 HCP金属の実験力学と計算力学)
- OS0602 高強度鋼の超高サイクル域における疲労寿命の推定(OS6-1 基礎疲労特性と試験法・評価法,OS-6 金属材料の超高サイクル疲労と信頼性評価)