Consideration of Optimal Input on Semi-Active Shock Control System (In Case of Collision-Receiving Object with Plastic Property):(In Case of Collision-Receiving Object with Plastic Property)
スポンサーリンク
概要
- 論文の詳細を見る
In press working, unidirectional transmission of mechanical energy is expected in order to maximize the life of the dies. To realize this transmission, the author has developed a shock control system based on the sliding mode control technique. The controller makes a collision-receiving object effectively deform plastically by adjusting the force of the actuator inserted between the colliding objects, while the deformation of the colliding object is held at the necessity minimum. However, the actuator has to generate a large force corresponding to the impulsive force. Therefore, development of such an actuator is a formidable challenge. The author has proposed a semi-active shock control system in which the impulsive force is adjusted by a brake mechanism, although the system exhibits inferior performance. Thus, the author has also designed an actuator using a friction device for semi-active shock control, and proposed an active seatbelt system as an application. The effectiveness has been confirmed by a numerical simulation and model experiment. In this study, the optimal deformation change of the colliding object is theoretically examined in the case that the collision-receiving object has perfect plasticity and the colliding object has perfect elasticity. As a result, the optimal input condition is obtained so that the ratio of the maximum deformation of the collision-receiving object to the maximum deformation of the colliding object becomes the maximum. Additionally, the energy balance is examined.
- 一般社団法人 日本機械学会の論文
著者
関連論文
- 422 CO_2 as Refrigerant for Water Heater Heat Pump : Comparing Performance during Nighttime and Daytime in Winter Time(International Session)
- Consideration of Optimal Input on Semi-Active Shock Control System (In Case of Collision-Receiving Object with Plastic Property):(In Case of Collision-Receiving Object with Plastic Property)