X-Ray CT Inspection for Porosities and Its Effect on Fatigue of Die Cast Aluminium Alloy
スポンサーリンク
概要
- 論文の詳細を見る
Effect of porosities on the fatigue properties of high-pressure die cast alminium alloy is addressed. Three-dimensional shape and location of porosities in the specimen were inspected by the X-ray CT to determine which pore affects the fatigue crack. The tension-compression fatigue test was carried out and the CT inspection was also conducted for all the specimens before and after the fatigue test.By comparing the CT inspection with the SEM observation of the fracture surface, we confirmed that the crack initiation was restricted to shrinkage pores near the specimen surface, and the inner large pores were not the source of fatigue crack. But we found that a cluster of shrinkage cavities can initiate a crack and affect the fatigue fracture although it exists far inside. Multiple cracks were also found on the bumpy fracture surface, and they seemed to reduce the fatigue life by coalescing into a single large crack. Moreover, we demonstrated the successive CT inspection during the fatigue test, and showed its availability to detect the fatigue crack propagation behaviour.
- 社団法人 日本機械学会の論文
著者
-
Murata Yozo
Department Of Mechanical System Engineering Graduate School Of Engineering Gunma University
-
Kuwazuru Osamu
Institute Of Industrial Science The University Of Tokyo
-
Utsunomiya Takao
Research Organization For Advanced Engineering Shibaura Institute Of Technology
-
Kitahara Soichiro
Gundai Co. Ltd.
-
Yoshikawa Nobuhiro
Institute Of Industrial Science The University Of Tokyo
-
Hangai Yoshihiko
Department Of Mechanical System Engineering Faculty Of Engineering Gunma University
関連論文
- ClusteredShrinkagePoresinIll-ConditionedAluminumAlloyDieCastings
- Simultaneous quasi-periodic optical and HF radar signatures observed in the postnoon sector
- Effects of Tool Rotating Rate and Pass Number on Pore Structure of A6061 Porous Aluminum Fabricated by Using Friction Stir Processing
- Conjugate imaging riometer observation at polar cusp/cap stations: A daytime absorption event for a specific change of solar wind conditions (scientific paper)
- Nondestructive observation of pore structures of A1050 porous aluminum fabricated by friction stir processing
- Discretized Modeling for Shape Finding of Soft Bodies
- Initial Characterization of a Fibroblast-loaded Porous Elastin Film Reconstituted by a Novel Crosslinker, Dode-DSP
- Effects of Amounts of Blowing Agent and Contained Gases on Porosity and Pore Structure of Porous Aluminum Fabricated from Aluminum Alloy Die Casting by Friction Stir Processing Route
- Quantitative Evaluation of Porosity in Aluminum Die Castings by Fractal Analysis of Perimeter
- 1204 Estimating Fatigue Crack Initiation of Aluminum Die Cast Alloy using Image Based Finite Element Analysis
- Theory of Elasticity for Plain-Weave Fabrics (1st Report, New Concept of Pseudo-Continuum Model)
- Foaming Conditions of Porous Aluminum in Fabrication of ADC12 Aluminum Alloy Die Castings by Friction Stir Processing
- Homology Design for Eigenvector of Bending Vibration Using Finite Element Method
- Shift synthesis to realize linear homologous deformation
- Design Methodology of Flexible Structures by Spring-and-Segment Model
- Finite Element Modeling of Textile Composite Using X-ray CT Images(Composite 2)
- Design Change to Realize Homologous Deformation
- Evaluation of Deformation Mode Change along 3-Dimensional Crack Front Line by CED
- Pore Defect Control in Die Casting by Compression Loading
- Effects of Porosity and Pore Structure on Compression Properties of Blowing-Agent-Free Aluminum Foams Fabricated from Aluminum Alloy Die Castings
- Theory of Elasticity for Plain-Weave Fabrics (2nd Report, Finite Element Formulation)
- Fabrication and Tensile Tests of Aluminum Foam Sandwich with Dense Steel Face Sheets by Friction Stir Processing Route
- Crack Energy Density on a 3-Dimensional Crack : Series A : Solid-Mechanics, Strength of Materials
- Relationship between Porosity and Interface Fracture on Aluminum Foam Sandwich with Dense Steel Face Sheets Fabricated by Friction Stir Processing Route
- Shear Deformation of Diamond Crystals: Topology Analysis of Electron Density
- Evaluation of Aging Effects on Skin Wrinkle by Finite Element Method
- WRINKLE ANALYSIS OF AGING SKIN BY FINITE ELEMENT METHOD(1E1 Computational Biomechanics)
- Effects of Porosity and Pore Structure on Compression Properties of Blowing-Agent-Free Aluminum Foams Fabricated from Aluminum Alloy Die Castings
- Relationship between Porosity and Interface Fracture on Aluminum Foam Sandwich with Dense Steel Face Sheets Fabricated by Friction Stir Processing Route
- X-Ray CT Inspection for Porosities and Its Effect on Fatigue of Die Cast Aluminium Alloy
- Real-Space ab initio Calculations on the Basis of Spectral Element Method
- Effects of Amount of Added Alumina and Holding Time on Manufacture of Porous Aluminum by Utilizing Friction Stir Processing
- Error-Convergence Property of ab-initio Finite-Element Calculation with Curving Grid
- Estimation of Plateau Stress of Porous Aluminum Based on Mean Stress on Maximum-Porosity Cross Section