Development of a Nuclear Hydrogen Production System by Dimethyl Ether (DME) Steam Reforming and Related Technology

概要

論文の詳細を見る
Targeting a hydrogen production system using heat produced by a nuclear reactor at about 300°C, we are developing a dimethyl ether (DME) steam reformer and hydrogen purification systems as well as catalysts for DME reforming. The use of heat from a nuclear reactor suppresses the CO2 concentration change in the atmosphere. In our developments, a catalyst, consisting of mixed oxides, produced hydrogen at a rate of about 1.9 Nm3/h per catalyst volume (m3) at about 300°C. Subsequently, the DME steam reformer achieved a hydrogen production rate of approximately, at least, 1.4 Nm3/h at about 300°C, by absorbing heat from the supplied steam. The aforementioned hydrogen production system via DME steam reforming is to be demonstrated using a thermal power plant. DME steam reforming by using waste heat and the utilization of the produced hydrogen within a combined cycle power plant can reduce fuel consumption, for instance, by about 17% compared to the case of direct DME combustion. The total system, with the use of DME, was compared with the methane case. If necessary, the byproduced CO2 may be injected into coal seams, increasing CH4 production via the substitution of CO2 for CH4 on coal, where CO2 adsorption is expected to be stronger than the CH4 adsorption.
一般社団法人日本機械学会の論文