S1303-2-1 CBN切削工具の刃先形状およびチャンファ面性状の最適化による構成刃先挙動制御と境界摩耗抑止([S1303-2]先端材料と加工(2))
スポンサーリンク
概要
- 論文の詳細を見る
In Inconel718 cutting with a cubic boron nitride (CBN) tool, notch wear caused by extruded built-up edge (BUE) along the cutting edge and secondary chip due to a side flow occurs significantly outside of the depth-of-cut line. The BUE extrusion behavior depends on tool geometry, such as chamfer angle, chamfer width and rake angle. The secondary chip easily forms if curled BUE is extruded unstably. On the other hand, the stable uncurled BUE extrusion causes neither the secondary chip formation nor the notch wear. In this study, the optimization of tool geometry for obtaining the stable BUE extrusion is attempted to suppress the notch wear.
- 一般社団法人日本機械学会の論文
- 2010-09-04
著者
-
糸魚川 文広
名古屋工業大学
-
中村 隆
統計数理研究所
-
中村 隆
名古屋工業大学
-
中村 隆
名工大
-
糸魚川 文広
名工大
-
中村 隆
名古屋工業大学 大学院工学研究科
-
中村 隆
名古屋工業大学産業戦略工学専攻
-
清田 大樹
名工大・院
-
柿原 淳史
名工大・院
関連論文
- 16・7 工具および工作機器(16.加工学・加工機器,機械工学年鑑)
- 引張応力を付与した摩擦摩耗試験によるWC系サーメット溶射皮膜の摩耗発生形態とメカニズムの解析
- 引張応力を付与した摩擦試験によるWC系サーメット溶射皮膜の摩耗特性の解析
- 加工液による工具の冷却と潤滑性
- 油膜付水滴加工液生成の安定化に関する研究(機械要素,潤滑,工作,生産管理など)
- 509 環境にやさしい油膜付水滴加工液(OoW)の潤滑・冷却特性評価(OS9 環境適応形加工)
- 放電加工における加工液の役割に関する考察 (第200回電気加工研究会)
- 透明熱可塑性樹脂のレーザ溶着における接合面のレーザ光吸収率
- 大気圧プラズマによる微細表面構造の創製とそのトライボロジー特性
- 金属と樹脂のレーザ接合における接合強度の向上