J0405-1-2 CFRP積層板損傷モニタリング用電気抵抗変化法の適用における銅めっき一体電極(知的材料・構造システム(1) 複合材料関連)

概要

論文の詳細を見る
For Carbon Fiber Reinforced Plastic (CFRP), electrical conductivity of carbon fiber can be used as a sensor for damage detection. The change of electrical resistance of the CFRP structure has been studied as a self-sensing system for monitoring damages. Todoroki et al. reported that the electrical resistance change method successfully monitored various damages like matrix cracking, fiber breakage and delamination in CFRP laminates. To apply the electrical resistance change method to practical structures, reliability of the electrodes is a key issue. This paper contains the proposal of "Lead-Wire Integrated Electrodes" and the investigation of the reliability of the proposed electrodes under cyclic load. The electrodes were bonded to CFRP surface by using copper plating after polishing of the specimen surface with sandpaper to remove the surface resin. Lead-Wire was put on the electrode and bonded to the electrode by using copper plating. This proposed electrode is no initial defect. The specimen for this experiment was made of unidirectional CFRP prepreg. Volume fraction of specimens used for the fatigue test was almost 65%. Fatigue tests were carried out using a servo-hydraulic testing system. As a result, the electrodes had a fatigue life at the same level as the conventional strain gages under cyclic load.
社団法人日本機械学会の論文
2009-09-12