炭素繊維強化エポキシ樹脂/アラミドハニカムサンドイッチ材の衝撃破壊特性と衝撃後残存強度に及ぼす水環境効果

概要

論文の詳細を見る
An investigation has been carried out concerning the influence of water absorption on the impact fracture behavior and the residual strength after impact of CFRP/Aramid honeycomb core sandwich panels. Some specimens were manufactured by a hotpress molding method and others by an autoclave one. Low velocity impact tests were conducted using a falling weight tester. When the applied impact energy was higher than the threshold one, below which no damage of honeycomb core was introduced, the percentage of the absorbed energy became large. Although the SEM observation showed the degradation of the fiber/matrix interfacial strength by water absorption, no influence of water absorption on the impact induced delamination area was observed. The residual strength after impact was evaluated by compression test and four point bending test. Due to voids and poor adhesion between facing and core materials of the hotpress specimens, the residual compressive strength of the hotpress specimen was smaller than that of the autoclave one.
社団法人日本機械学会の論文
2004-02-25