多層溶接部の溶接直後急冷法による残留応力改善
スポンサーリンク
概要
- 論文の詳細を見る
To reduce tensile residual stress in a welded region, we developed a new welding method that applies a water-shower behind the welding torch. When this method is applied to welding of austenitic stainless steel plates, cooling conditions mainly determine how much the residual stress can be reduced. To determine the conditions, we first used FEM to evaluate the effects of interpass temperature on the residual stress. And we found effective conditions for reducing tensile residual stress. To verify the validity of the conditions, specimens welded with or without water shower cooling were manufactured. Residual stresses of the specimens were experimentally measured. It was found that tensile residual stresses were generated on the surface of the welds and those were reduced in the case that the water-shower was applied. These measurement results agree well with the FEM analyses. It can therefore be concluded that the water-shower cooling during welding is appropriate for reducing tensile residual stress in austenitic stainless steel welding.
- 社団法人日本機械学会の論文
- 2006-11-25
著者
関連論文
- Ni基合金溶接金属をクラッド溶接した低合金鋼異材部の残留応力解析
- Ni基合金粉末を用いた機械部品へのプラズマ肉盛及び高効率レーザ肉盛
- 214 Ni基合金粉末を用いた機械部品へのプラズマ肉盛及び高効率レーザ肉盛(レーザー表面改質)
- 123 レーザ肉盛による機械部品の補修肉盛の研究(肉盛・高温割れ)
- 723 水急冷による引張残留応力低減溶接方法の施工条件の最適化
- 809 多パスビード溶接部の溶接直後急冷法による残留応力改善(材料強度と構造設計)
- 20420 補修溶接部の溶接直後急冷法による残留応力改善(材料力学(2))
- 430 圧力容器貫通部の残留応力評価手法の検証(OS3-7 SCC・残留応力,OS3 エネルギー構造機器の健全性評価と信頼性の高度化3)
- 425 ボロン入りステンレス鋼溶接材料の検討(溶接冶金(I),平成18年度春季全国大会)
- ボロン入りステンレス鋼溶接材料の検討
- 中靱性材料からなる圧力配管の LBB の成立性と限界き裂長さ
- 351 ステンレス鋼配管溶接部の残留応力低減溶接工法の開発(溶接変形・残留応力(II),平成20年度秋季全国大会)
- 306 画像処理による溶接制御システムの開発
- 21310 配管突合せ溶接過程の内外面水冷による残留応力改善(材料強度と構造設(1),OS.5 材料強度と構造設計)
- 多層溶接部の溶接直後急冷法による残留応力改善
- 507 多層溶接における溶接直後急冷による残留応力低減挙動の熱弾塑性解析(OS-5B 金属の変形と損傷,OS-5 材料の塑性挙動の構成式のモデル化とシミュレーション)
- OS1432 ウォータージェットピーニング(WJP)の開発(4) : WJPの残留応力改善挙動評価(エネルギー機器の経年劣化に関する健全性評価,オーガナイズドセッション)
- 繰返し荷重を受ける切欠材の弾塑性挙動
- 333 複合硬化則を用いたSUS316Lの応力-ひずみ関係の検討(応力・歪,平成20年度春季全国大会)
- 348 差込継手の残留応力分布に及ぼす斜角構造の影響(OS10-3 照射劣化,溶接部評価,OS10 エネルギー機器の経年変化に関する健全性評価手法の開発とその適用(2))
- α鉄のき裂進展の分子動力学シミュレーションにおける格子方位の影響 : 主要すべり方向を面内に含む場合
- 分子動力学法を用いたα鉄の延性き裂進展シミュレーションにおける温度調節と負荷速度の影響
- 内部時間理論を用いた任意繰返し塑性問題の材料定数の決定法
- ICPVT-13に参加して