Determination of Coefficient for Transformation Plasticity in Terms of Three-Point Bending System
スポンサーリンク
概要
- 論文の詳細を見る
To determine the transformation plasticity coefficient, a three-point bending system is employed and the large deflection due to transformation plasticity in bending is analyzed under the simplified assumption that transformations occur uniformly across the cross-section of a beam. It is shown that the deflection due to transformation plasticity is similar to that due to elastic deformation, and simple relationships are also derived between the ratio of the maximum deflection to the elastic deflection and material constants (transformation plasticity coefficient K and Young's modulus E). Experiments are carried out for a slender bar specimen, which is loaded in a three-point bending system, and the austenized specimen is cooled so that martensite transformation accompanied by transformation plasticity occurs and the profile and maximum value of the deflection of the specimen are measured. The measured profiles of deflection agree very well with the theoretical results. This proves the validity of the proposed method. The transformation plasticity coefficient is also determined by the proposed method.
- 一般社団法人日本機械学会の論文
- 2005-01-15
著者
-
OSHITA Kenichi
Department of Mechanical System Engineering, Tokyo University of Agriculture & Technology
-
Oshita Kenichi
Department Of Mechanical Systems Engineering Tokyo University Of Agriculture And Technology
-
Oshita Kenichi
Department Of Mechanical System Engineering Tokyo University Of Agriculture & Technology
-
NAGAKI Shigeru
Department of Applied Mechanics, Okayama University
-
ASAOKA Shinichi
Pioneer Display Products Co., Ltd.
-
MOROZUMI Katsuyuki
Nihon ESI K.K.
-
Nagaki Shigeru
Department Of Mechanical Systems Engineering Tokyo University Of Agriculture And Technology
-
Nagaki Shigeru
Department Of Applied Mechanics Okayama University
-
Asaoka Shinichi
Pioneer Display Products Co. Ltd.
-
Asaoka Shinich
Pioneer Display Products Co., Ltd.
関連論文
- Inelastic Analysis of Notched Components in Silicon Nitride Ceramics at Elevated Temperature (Solid Mechanics and Material Engineering)
- Plastic Deformation of Metallic Materials with Elliptic Inclusions
- Determination of Coefficient for Transformation Plasticity in Terms of Three-Point Bending System
- Yield Stress of Randomly Perforated Sheets and Anisotropic Yield Function
- Inhomogeneous Deformation of Grains and Roughening of Free Surface of Polycrystalline Copper in Compressive Plastic Deformation
- ON COUPLE STRESS THEORY OF ELASTIC-PLASTIC MATERIALS WITH DIRECTOR AND SLIP TRIADS
- Analysis of Plastic Deformation and Taylor Slips in FC'C Polycrystals by Rigid-plastic Finite Element Method
- Yield Criteria for Ductile Porous Solids
- Two Cases of Precocious Puberty Associated with Hypothalamic Hamartoma