材料組織の異なるステンレス鋼の疲労強度に及ぼす水素チャージの影響

概要

論文の詳細を見る
The effect of hydrogen on fatigue strength of stainless steels was investigated. There were no definite differences in fatigue life of unnotched specimens between hydrogen-charged specimen (2.4〜6.4ppm) and uncharged specimen (2.2ppm) of SUS 304. High content of hydrogen (10〜100ppm) was detected in a very thin surface layer, approximately at 100〜200μm from specimen surface of SUS 304 specimens hydrogen-charged for 336〜672 hours. There were also no definite differences in fatigue life of unnotched specimens between hydrogen-charged specimen (1.8〜5.8ppm) and uncharged specimen (0.1ppm) of SUS 405. The uncharged specimens of 0.7C-13Cr steel (0.2ppm) failed from subsurface non-metallic inclusions in surface layer. ODAs (Optically Dark Area) were not observed due to the tensile residual stress in the surface layer although the specimens failed in the high cycle regime of 10^7 cycles. Increasing hydrogen content from 0.2 ppm to 2.4〜2.7ppm, the fatigue strength and fatigue life were markedly decreased in 0.7C-13Cr steel.
一般社団法人日本機械学会の論文
2006-01-25