新しい設計手法を用いた3翼小翼面積比プロペラに関する研究
スポンサーリンク
概要
- 論文の詳細を見る
It is well known that the reduction of a blade area ratio and a number of blades are the effective means for improvement of propeller efficiency. On the other hand, the reduction of a blade area ratio and a number of blades cause problems such as a severe cavitation and a excessive propeller surface force. Due to these problems, it is not general for a merchant ship to have a three bladed propeller with smaller blade area ratio. The authors designed the prototypes of three bladed propeller with smaller blade area ratio (expanded area ratio of 0.25) by the new design method which can take into consideration of the variations of effective attack angle in a wake to make pressure distributions on blade surface desirable in view of cavitation. Model experiments were also carried out for the purpose of comparison between a newly designed propeller (SBA type) and a conventional propeller (MAU type). The results this time indicate that the new design method is useful to control and reduce a cavitation and a hull surface pressure of the propeller. The results in the research are summarized below. (1) The propeller efficiency of the newly designed three bladed propeller with smaller blade area ratio (SBA3-25) was improved by about 5% at Reynolds number R_<nD>=6.0 x 10^5 in comparison with the conventional four bladed propeller (MAU4-46). (2) Cavity extent on propeller blade surface for the new propeller (SBA3-25) was remarkably reduced to about a half of the case for the MAU type (MAU3-25). The fluctuating pressure on the stern hull for the SBA3-25 was reduced by about 20% as compared with the MAU3-25. This pressure was almost the same level as that in non-cavitating condition and same as that of the MAU4-46. (3) The characteristics of a smaller blade area propeller was found to be much influenced by the Reynolds number in model propeller open test. (4) It is necessary to make further study because the strength was not exactly considered in this investigation and the self propulsion test behind model ship was not performed. The evaluation of the performances for this kind of propeller should be investigated at full scale in future.
- 1986-06-30
著者
関連論文
- ルート***ージョン防止を目的とした高速艇用新型プロペラの開発
- (3) ルート***ージョン防止を目的とした高速艇用新型プロペラの開発 : 平成10年秋季講演論文概要
- 実船プロペラ翼面圧力計測 : ハイリースキュードプロペラに関する計測(推進性能部,所外発表論文等概要)
- 実船プロペラ翼面圧力計測 : ハイリースキュードプロペラに関する計測
- 実船プロペラ翼面圧力計測 : 通常型プロペラに関する計測(推進性能部,所外発表論文等概要)
- 実船プロペラ翼面圧力計測 : 通常型プロペラに関する計測
- 新しい設計手法を用いた3翼小翼面積比プロペラに関する研究
- 219 NURBS 直接法による三次元立体形状の定義とその今日的意義
- 高感度商品を実現するための技能と技術
- ナカシマプロペラ株式会社
- デジタル日本人が拓く新しい伝承世界
- ポスト日本人のための情報戦略
- デジタル時代の職人像を求めて
- パソコン通信のすすめ
- 後流エネルギ回収装置"タ-ボプロペラ"について
- ハイスキュープロペラの系統的模型試験および実船実験
- 実船に装備された遊転プロペラについて