Film Cooling from Two Rows of Holes with Opposite Orientation Angles : Heat Transfer

スポンサーリンク

概要

• 論文の詳細を見る

• Heat transfer coefficient ratio distributions are measured for film cooling from two rows of holes with opposite orientation angles. The inclination angle is fixed at 35゜, and orientation angles are set to 45゜ for the downstream row and -45゜ for the upsteam row. Four film cooling hole arrangements including inline and staggered configurations are investigated. The blowing ratios considered are 0.5, 1.0 and Configuration effects on the heat transfer are not significant at the blowing ratio of 0.5. At the higher blowing ratios of 1.0 and 2.0, however, the inline configuration produces higher heat transfer coefficient distributions compared to others. In spite of the high heat transfer level, the inline configuration shows better film cooling performance, represented by the heat flux ratio, at the blowing rations of 1.0 and 2.0 due to its higher adiabatic film cooling effectiveness.

• 一般社団法人日本機械学会の論文
• 2000-11-15

著者

• LEE Joon

  School of Mechanical and Aerospace Engineering, Seoul National University

• Jung In

  School Of Mechanical And Aerospace Engineering Seoul National University

• Ahn Joon

  School Of Mechanical And Aerospace Engineering Seoul National University

• Lee Joon

  School Of Mechanical And Aerospace Engineering Seoul National University

関連論文

• Wave Interference Effect in Thin Film Structures under Pulsed Laser Irradiation
• Femtosecond Laser Pulse Train Effect on Optical Characteristics and Nonequilibrium Heat Transfer in Thin Metal Films
• Film Cooling from Two Rows of Holes with Opposite Orientation Angles : Heat Transfer
• F314 FILM COOLING FROM TWO ROWS OF HOLES WITH OPPOSITE ORIENTATION ANGLES : HEAT TRANSFER(Fluid machinary-3)
• Fatigue Strength of Ti-6Al-4V Alloys Containing Small Artificial Defects
• F-6-4-3 Computer Integrated System for Virtual Design and Dynamic Performance Test of a Hydraulic Excavator

スポンサーリンク