Effects of Intensity of Bending Restraint on Lamellar Tearing and Root Cracking in Corner Joint
スポンサーリンク
概要
- 論文の詳細を見る
The effects of the intensity of bending restraint on lamellar tearing and root cracking in corner joints are investigated with the aid of a newly developed method of test which is named here "Corner Joint Weld Cracking Test (CJC-test)." The result of the CJC-test is compared with that obtained from an experiment carried out in this study on a large structural model. The main results are as follows : 1) The lamellar tearing occurs where the intensity of bending restraint is above the critical value. Therefore, "the critical intensity of bending restraint for lamellar tearing" can be obtained for the specified materials and welding conditions from the CJC-test. 2) As the critical value is influenced by several factors, the following methods are effective to reduce the possibility of the occurrence of the lamellar tearing : to use steel plates of good ductility through thickness and to make the throat depth as small as possible. 3) The occurrence of the lamellar tearing in actual structures can be predicted by use of the intensity of bending restraint of the structures on the basis of the result of the CJC-test.
- 社団法人溶接学会の論文
著者
-
Ueda Yukio
Welding Research Institute, Osaka University
-
NISHIMURA Iwao
Kurimoto Iron Works, Ltd.
-
IIYAMA Hideaki
Kurimoto Iron Works, Ltd.
-
CHIBA Naomichi
Kurimoto Iron Works, Ltd.
-
Ueda Yukio
Welding Research Institute Of Osaka University
関連論文
- 10. Development of Computer Aided Process Planning System for Plate Bending by Line-Heating
- Three Dimensional Cold Bending and Welding Residual Stresses in Penstock of 80kgf/mm^2 Class High Strength Steel Plate(Welding Mechanics, Strength & Design)
- Effect of Intensity of Bending Restraint on Weld Cracking in Multipass Weld
- Application of Finite Element Method for Analysis on Process of Stress Relief Annealing
- Prediction of Welding Residual Stresses in T-and I-Joints Using Inherent Strains : A predicting method of welding residual stress using source of residual stress (Report 3)
- Prevention of Lamellar Tearing in Multipass Welded Corner Joint
- Effects of Intensity of Bending Restraint on Lamellar Tearing and Root Cracking in Corner Joint
- Dynamical Characteristics of Weld Cracking in Multipass Welded Corner Joint
- 12. Ultimate Strength of Stiffened Plates and Minimum Stiffness Ratio of Their Stiffeners
- Modern Method of Ultimate Strength Analysis of Offshore Structures(Physics, Process, Instrument & Measurement)