Mechanical Properties and Grindability of Experimental Ti-Au Alloys
スポンサーリンク
概要
- 論文の詳細を見る
Experimental Ti-Au alloys (5, 10, 20 and 40 mass% Au) were made. Mechanical properties and grindability of the castings of the Ti-Au alloys were examined. As the concentration of gold increased to 20%, the yield strength and the tensile strength of the Ti-Au alloys became higher without markedly deteriorating their ductility. This higher strength,can be explained by the solid-solution strengthening of the a titanium. The Ti-40%Au alloy became brittle because the intermetallic compound Ti_3Au precipitated intensively near the grain boundaries. There was no significant difference in the grinding rate and grinding ratio among all the Ti-Au alloys and the pure titanium at any speed.
- 日本歯科理工学会の論文
著者
-
TAKAHASHI Masatoshi
Division of Dental Biomaterials, Tohoku University Graduate School of Dentistry
-
KIKUCHI Masafumi
Division of Dental Biomaterials, Tohoku University Graduate School of Dentistry
-
Kikuchi Masafumi
Division Of Dental Biomaterials Tohoku University Graduate School Of Dentistry
-
Takahashi Masatoshi
Division Of Dental Biomaterials Tohoku University Graduate School Of Dentistry
-
OKUNO Osamu
Division of Dental Biomaterials, Tohoku University Graduate School of Dentistry
-
Kikuchi M
Division Of Dental Biomaterials Tohoku University Graduate School Of Dentistry
-
Kikuchi Masafumi
Division Of Dental Biomaterials Graduate School Of Dentistry Tohoku University
-
Takahashi M
Division Of Dental Biomaterials Graduate School Of Dentistry Tohoku University
-
Okuno O
Division Of Dental Biomaterials Tohoku University Graduate School Of Dentistry
-
Okuno Osamu
Division Of Dental Biomaterials Graduate School Of Dentistry
-
Okuno Osamu
Division Of Dental Biomaterials Tohoku University Graduate School Of Dentistry
関連論文
- Calcium Phosphate Formation on Ti-Ag Alloys in Simulated Body Fluid
- Corrosion Resistance of Dental Ti-Ag Alloys in NaCl Solution
- Grindability of Dental Cast Ti-Zr Alloys
- Machinability of Experimental Ti-Cu Alloys
- Machinability of Experimental Ti-Ag Alloys
- Electrochemical Behavior of Cast Ti-Ag Alloys
- Corrosion Behavior and Microstructures of Experimental Ti-Au Alloys
- Mechanical Properties and Grindability of Experimental Ti-Au Alloys
- Mechanical Properties and Grindability of Dental Cast Ti-Nb Alloys
- Grindability of Dental Cast Ti-Ag and Ti-Cu Alloys
- Mechanical Properties and Microstructures of Dental Cast Ti-Ag and Ti-Cu Alloys
- Ions Released from Dental Amalgams in Contact with Titanium
- Galvanic Corrosion of Dental Amalgams in Contact with Titanium in Terms of Released Ions
- Machinability Evaluation of Titanium Alloys (Part 2) : Analyses of Cutting Force and Spindle Motor Current
- Machinability Evaluation of Titanium Alloys
- Grindability of Dental Magnetic Alloys
- Ceramic Bonding Strength of Au-1.6 wt% Ti Alloy
- Corrosion Characteristics of α-Ti and Ti_2Cu Composing Ti-Cu Alloys
- Effect of Heat History on the Corrosion of Ferritic Stainless Steels Used for Dental Magnetic Attachments
- Effect of antiferromagnetic grain size on exchange anisotropy in Ni-Fe/25 at% Ni-Mn films
- Microstructure and Corrosion Behavior of Binary Titanium Alloys with Beta-stabilizing Elements
- Effect of Film Thickness on Magnetic properties and Microstructure for CoCrTa Media Fabricated under the Ultra Clean Sputtering Process
- Influence of Microstructures on Magneto-Optical Kerr Effect for MnSbPt Films : Effect of Precipitation and Recrystallization of PtMnSb Phase
- Dielectric Tensor and Magneto-Optical Kerr Effect for Mn-Sb-M (M=Au,Pd) Films Consisting of MnSb and MMnSb Phases
- Effect of Pt on the Intergranular Exchange Coupling in CoCrTaPt Thin Film Media Prepared under Ultra Clean Sputtering Process
- Geometric design method for class I inlay cavity
- Age-hardening and phase transformation in an Ag-Cu-Pd-Au alloy
- Isothermal Age-hardening Behaviour in a Au-1.6 wt% Ti Alloy
- Galvanic Corrosion of Ferritic Stainless Steels Used for Dental Magnetic Attachments in Contact with an Iron-platinum Magnet
- Electrochemical Properties and Released Ions of Au-1.6mass%Ti Alloy
- Corrosion Resistance of the Pt-Fe-Nb Magnets for Dental-casting
- Galvanic Corrosion between Dental Precious Alloys and Magnetic Stainless Steels Used for Dental Magnetic Attachments
- The Thickness Effects of Titanium Castings on the Surface Reaction Layer
- Geometric design method for occlusal outlines of complex class I and class II inlay cavities