Stability of Vertical Fluid-Conveying Pipes Having the Lower End Immersed in Fluid
スポンサーリンク
概要
- 論文の詳細を見る
This paper concerns a beam-type flutter of vertical pipes containing a flowing fluid and having the lower end immersed in fluid. The effect of surrounding fluid on motions of the pipe is assumed as a mass added to the immersed part of the pipe. The equivalent added mass is estimated using Morison's formula. The effects of the immersed length of the pipe on the critical flutter velocity are investigated. It is predicted theoretically that the lower end immersed in fluid may exert a considerable destabilizing effect, except in the case where the lower end is only slightly immersed in fluid and the mass ratio is as high as 0.75. Experiments with silicone-rubber tubes conveying water were conducted to check the theoretical predictions. It was confirmed that for sufficiently high flow velocities the tube was subject to violent flutter, and that the critical flutter velocity decreased with increasing immersed length of the lower end.
- 一般社団法人日本機械学会の論文
- 1996-02-15
著者
-
Fujita Katsuhisa
Takasago Research & Development Center Mitsubishi Heavy Industries Ltd.
-
Fujita Katsuhisa
Takasago R & D Center Mitsubishi Heavy Industries Ltd.
-
Sugiyama Yoshihiko
Department Of Aerospace Engineering Osaka Prefecture University
-
KATAYAMA Tadakazu
Department of Aerospace Engineering, Osaka Prefecture University
-
KANKI Eiji
Department of Aerospace Engineering, Osaka Prefecture University
-
CHIBA Masakatu
Department of Mechanical System Engineering, Iwate University
-
SHIRAKI Kazuhiro
Takasago Research & Development Center, Mitsubishi Heavy Industries Ltd.
-
Kanki Eiji
Department Of Aerospace Engineering Osaka Prefecture University
-
Chiba Masakatu
Department Of Mechanical System Engineering Iwate University
-
Katayama Tadakazu
Department Of Aerospace Engineering Osaka Prefecture University
-
Shiraki Kazuhiro
Takasago Research & Development Center Mitsubishi Heavy Industries Ltd.
-
Fujita Katsuhisa
Takasaco Technical Institute Technical Headquarters Mitsubishi Heavy Industries Ltd.
関連論文
- Scram Characteristics of Control Rods of Pressurized Water Reactor Under Seismic Conditions
- Pneumatosis Intestinalis in the Small Bowel of an Adult : Report of a Case
- Active Adaptive Feedback Control of Sound Field
- Colonic Adenocarcinoma Metastatic to the Thyroid : Report of a Case
- Seismic Response of Liquid Sloshing in the Annular Region Formed by Coaxial Circular Cylinders
- Vibrational Response Analysis of Mistuned Bladed Disk
- Optimal Design of Turbine Blade using Sensitivity Analysis
- A Study on the Flow Induced Vibration of a Tube Array by a Two-Phase Flow (2nd Report, Large Amplitude Vibration by Steam-Water Flow) : Series C : Vibration, Control Engineering, Engineering for Industry
- Experimental Study on the Vibration of Circular Cylinders Subjected to Cross-flow : Relation Between Uniform Cross-flow and Gap Cross-flow : Vibration, Control Engineering, Engineering for Industry
- Experimental Study on the Vibration of Circular Cylinders Subjected to Cross-flow : Case of Cross-flow Jetted from a Narrow Gap
- Stability of Vertical Fluid-Conveying Pipes Having the Lower End Immersed in Fluid
- Two-Phase Cross-Flow-Induced Vibration of Tube Arrays : Brief Review of Previous Studies and Summary of Design Methods
- Seismic Testing of the Base-Isolated PWR Spent-Fuel Storage Rack
- A Seismic Response Analysis of a Cylindrical Liquid Storage Tank
- A Seismic Response Analysis of a Cylindrical Liquid Storage Tank Including the Effect of Sloshing : 2nd Report, Analysis Based on Energy Method
- Vibrational Characteristics and Seismic Response Analysis of Column Group in Liquid
- Vibration Analysis of Fluid-coupled Two Coaxial Axisymmetric Shells Containing Liquid