113 一様な流れに置かれた周方向に V 型溝を有する円柱の流体抵抗

概要

論文の詳細を見る
The profile drag of circular cylinders with v-type grooves in the circumferential, spiral direction and crossing at the angles of 60゜ was measured in the range of Reynolds number Re=1.5×(10)^4 to 7×(10)^4 in a uniform flow. An Eiffel type low speed wind tunnel in an experimental apparatus produces a muximum velocity of 21m/s at the blow down section of width 300mm and height 400mm. The effects of the groove direction and the roughness on the drag coefficient were examined experimentally. The measurement of profile drag was carried out a direct method using the strain gauge load cells. The roughness of the cylinder surface was shown by the ratio h/d of v-type groove depth h and the diameter d of test cylinder. V-type grooves crossing at the angles of 60゜ have a great effect on the profile drag of circular cylinders. As h/d increases, the drag coefficient for the circular cylinders dercreases abruptly at lower Re. The drag coefficient for the circular cylinders with v-type grooves in the circumferential and spiral direction did not show the characteristic change in the present experiment range.
一般社団法人日本機械学会の論文
2002-03-16