E209 CHARACTERISTICS OF EVAPORATION HEAT TRANSFER AND FLOW PATTERN OF PURE REFRIGERANT HFC134a IN A HORIZONTAL CAPILLARY TUBE(Evaporation-1)
スポンサーリンク
概要
- 論文の詳細を見る
In the present study, the characteristics of heat transfer and flow pattern are investigated experimentally for evaporation of pure refrigerant HFC134a in capillary tubes of 2.0 and 0.84mm I.D. The test section consists of a heating stainless steel tube section and a glass-tube section, which is located at the right after the outlet of the heating section. The experiments were carried out in the ranges of mass velocity of 100〜600 kg/m^2s and heat flux of 1.16〜46.8 kW/m^2 at a constant inlet pressure of about 920 kPa. Experimental results of local heat transfer coefficient, pressure drop and flow pattern were compared with previous studies.
- 一般社団法人日本機械学会の論文
- 2000-10-01
著者
-
Koyama Shigeru
Institute Of Advanced Material Study Kyushu University
-
Hashimoto Yoshitaka
Interdisciplinary Graduate School Of Engineering Sciences Kyushu University
-
KUWAHARA Ken
Institute of Advanced Material Study, Kyushu University
-
Kuwahara Ken
Institute For Materials Chemistry And Engineering Kyushu University
-
Koyama Shigeru
Institute Advanced Material Study Kyushu University
関連論文
- Characteristics of Evaporation Heat Transfer and Flow Pattern of Pure Refrigerant HFC134a in a Horizontal Capillary Tube
- E209 CHARACTERISTICS OF EVAPORATION HEAT TRANSFER AND FLOW PATTERN OF PURE REFRIGERANT HFC134a IN A HORIZONTAL CAPILLARY TUBE(Evaporation-1)
- TED-AJ03-292 FLOW AND ABSORPTION CHARACTERISTICS OF AMMONIA-WATER MIXTURE IN A SLUG FLOW ABSORBER AT LOW SOLUTION FLOW RATE
- Isothermal Adsorption Measurement for the Development of High Performance Solid Sorption Cooling System
- Multi-Bed Multi-Stage Adsorption Refrigeration Cycle-Reducing Driving Heat Source Temperature
- Local Heat and Mass Transfer in a Counter-current Slug Flow Absorber for Ammonia-water Absorption Heat Pump System (特集 ACRA-2002講演論文選集(1))
- TED-AJ03-559 DEVELOPMENT OF MULTI-BED ADSORPTION CHILLER FOR LOW-TEMPERATURE WASTE HEAT RECOVERY
- Experiments on Single Phase Heat Transfer and Pressure Drop in a Spiral Capillary Tube
- Experimental Study on Flow Boiling Heat Transfer and Pressure Drop Characteristics of HFC134a in a Multi-Port Extruded Tube
- I302 CONDENSATION OF BINARY ZEOTROPIC WORKING FLUID IN A PLATE HEAT EXCHANGER(Condensation and heat exchanger)
- TED-AJ03-200 EXPERIMENTAL STUDY ON VAPOR-LIQUID TWO-PHASE FLOW OF R134A INSIDE SMOOTH AND MICROFIN TUBES : RELATION OF VOID FRACTION AND VAPOR QUALITY AT ADIABATIC CONDITION
- TED-AJ03-311 HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF R134a CONDENSING IN A MULTI-PORT EXTRUDED TUBE
- I303 HEAT TRANSFER CHARACTERISTICS OF PURE REFRIGERANT HFC134a CONDENSING IN A MULTI-PORT EXTRUDED TUBE(Condensation and heat exchanger)
- An Experimental Study of Evaporation Heat Transfer of Refrigerant HCFC22 Inside an Internally Grooved Horizontal Tube
- Condensation of Binary Refrigerant Mixtures in a Horizontal Smooth Tube
- Numerical study on in-tube laminar heat transfer characteristics of CO_2 at supercritical condition
- Experiment on Cooling Heat Transfer of Carbon Dioxide in a Multi-Port Extruded Tube at Supercritical Pressure
- Condensation of A Ternary Zeotropic Refrigerant Mixture in A Horizontal Micro-fin Tube