Visualization of Flame Propagation in a Spark Ignition Engine with an Unscavenged Prechamber
スポンサーリンク
概要
- 論文の詳細を見る
To obtain a better understanding of the combustion process in a spark ignition engine with an unscavenged horizontal prechamber connected to a main chamber by a torch nozzle of various area sizes (An), the flame propagations in the pre- and main chambers are simultaneously visualized with high-speed photography under such operating conditions as the optimum spark advance for best torque (MBT), volumetric efficiency ηυ=80±2%, air-fuel ratio of A/F<bsime>15 and engine speed of N <bsime>1000 rpm. The torch flame patterns in the main chamber are found to correspond fairly well with those of heat release rates computed from the ensemble-averaged pressure diagrams. On the basis of those flame photographs, several combustion characteristics, namely, the apparent flame speed, timing of actual ignition, ejected timing of torch flame and timing of combustion finish and combustion area fraction are also examined for each torch nozzle with different areas and an open chamber. In addition, the correlations between the above combustion characteristics and the engine performances are discussed.
- 一般社団法人日本機械学会の論文
- 1989-02-15
著者
-
Ohtsu Akihiko
Honda R&d Co. Ltd.
-
RYU Hano
Department of Mechanical Engineeing, Tokai University
-
ASANUMA Tsuyoshi
Department of Mechanical Engineeing, Tokai University
-
Ryu Hano
Department Of Mechanical Engineeing Tokai University
-
Asanuma Tsuyoshi
Department Of Mechanical Engineeing Tokai University
関連論文
- Visualization of Flame Propagation in a Spark Ignition Engine with an Unscavenged Prechamber
- Numerical simulation of a Viscous Axisymmetric Jet Impinging Normally on a Flat Wall
- Local Analysis of the Stability of Liquid Capillary Jet
- Numerical Prediction of Jet Breakup Length Considering the Velocity Profile Relaxation
- Measurements and Calculations of the Two-Dimensional Flow Field in a Motored Engine with a Prechamber