改良したホプキンソン圧縮分割棒法によるセラミックスの衝撃圧縮試験と衝撃特性

概要

論文の詳細を見る
The misalignment of the flat anvil of a testing machine with the end of a circular rod specimen causes local crushing due to the stress concentration and bending moment, which must be avoided in compression tests. When very hard material, such as fine ceramics, is tested using the compression split Hopkinson bar, the hard specimen may be indented into the incident and transmission bars. In this paper, the insertion of a thin metal plate between the bar-specimen interface in the conventional compression split Hopkinson bar system was examined to prevent indentation. The stress pulse in the incident and transmission bars is measured using the thin steel plate (thickness 0.4 and 1 mm), copper (1 mm) and aluminium (1 mm) , and the pulse profile is investigated. The configuration of the wave observed using the thin steel plate (0.4 mm) is the sharpest, and is similar to that without the plate. The rise of pulses using the steel plate (1 mm) is ramplike. With use of a copper plate and aluminium, the two-step profile appears. The stress-strain relationship evaluated from these stress pulses was compared with that obtained in the static test. The dynamic strength of ceramics is less than about half the static strength.
一般社団法人日本機械学会の論文
1994-04-25