円管の横圧縮変形に及ぼす肉厚の影響
スポンサーリンク
概要
- 論文の詳細を見る
In the present study, the effects of tube thickness and the mechanical properties of tube materials on the elastic-plastic deformation of circular tubes compressed laterally between rigid plates, were investigated. A series of lateral compression tests were carried out for a commercially pure aluminium 1197-O, and two aluminium alloys, 6063-T5 and 2014-T1, at a quasi-static rate. In most of the specimens of 2041-T1 and 6063-T5, fracture occurs during lateral compression tests. The location of relatively thinner specimens was the outer surface close to the horizontal ends and that of thicker specimens was the inner surface close to the vertical ends. In order to investigate stress and strain in the deforming tube, finite-element analyses were also performed. The load/deflection curves of tubes obtained from the FEM analysis showed good agreement with those obtained from experiments. The FEM results could explain well the change of fracture location.
- 社団法人日本機械学会の論文
- 1991-06-25
著者
関連論文
- 空手道試割りの力学的解析 (スポーツ工学)
- セラミックス円管の衝撃横圧縮試験
- ぜい性三角形平板の衝撃破壊
- 面内方向衝撃を受ける平板の破壊 : 引張応力波の集中と衝撃破壊パターン
- F05-(5) バイオミメティックスに関する最近の話題 : 英国 Reading 大学バイオミメティックス研究室
- 円管の横圧縮変形に及ぼす肉厚の影響
- 円管の横圧縮変形に関する有限要素解析
- 脆性材料の破壊靭性試験用クラック・スタビライザーの開発
- 発泡紙の圧縮変形におけるひずみ速度依存性と吸収エネルギー
- β-Ti合金の衝撃強度
- 高速移動内圧を受ける円管の動的挙動
- 高温高速移動内圧を受ける円管の熱変形挙動
- 336 高温移動内圧を受ける円管の熱変形
- 円管の割れを伴う動的および静的横圧縮変形
- フキの葉の脈系パターンとその力学的寄与
- 脆性材料の3点曲げにおける負荷速度急変試験
- 異形棒鋼の曲げ加工における面外変形に及ぼす非対称断面形状の影響-鉄筋コンクリート用異形棒鋼の曲げ加工I-
- セラミックス円管の横圧縮試験と引張試験
- 衝撃一軸引張試験における最高荷重条件とHartの塑性不安定則の表示式
- 脆性材料の3点曲げ試験における安定破壊
- ソーダ石灰ガラスの3点曲げ試験における擬安定き裂進展現象
- ぜい性材料の衝撃引張強度測定法(衝撃)
- 溶接接合ハニカムパネルの弾塑性曲げ変形
- 波板状に折り畳まれた植物の葉の展開様式
- リサイクルゴムチップ成形板の変形計測と数値シミュレーション
- 310 簡易凍結防止舗装道路に関する基礎研究
- コンクリートの衝撃引張り強度の測定(材料・構造の衝撃問題)
- 波板状に折畳まれた樹の葉の葉脈角と成長・展開速度(材料の内部構造と力学特性)
- 反射引張応力波によるモルタル材の衝撃引張強度測定と評価法の検討(衝撃)
- 518 コンクリート材の衝撃引張り強度とひずみ速度依存性
- ハニカムパネルの型曲げ加工に及ぼす加工温度の影響
- ペーパーハニカムコアの動的及び静的圧縮試験と吸収エネルギ(材料・構造の衝撃問題)
- 切欠きを通過する表面波の挙動