Strength Evaluation of Asymmetric Single Lap Joints : 2nd Report, Effects of The Taper of Adherends
スポンサーリンク
概要
- 論文の詳細を見る
The deformation and strength of tapered lap joints having different thicknesses of adherends were investigated both analytically and experimentally. The strain distributions of the joints of carbon steel bonded with epoxy resin under tensile shear loading were analyzed by the finite element method. The analytical strain distributions coincided approximately with the experimental results. The strength of tapered lap joints was estimated by using the strength laws of adherend, adhesive resin and adhesive interface. The results were compared with the experimental strength of the joints. Initial cracking in the joints did not lead directly to a final fracture and the joints were able to carry the increasing load. It was shown that the tapering of the adherends was effective in improving the strength of the asymmetric single lap joints.
- 一般社団法人日本機械学会の論文
著者
-
SUGIBAYASHI Toshio
Research Laboratory of Precision Machinery and Electronics, Tokyo Institute of Technology
-
IKEGAMI Kozo
Research Laboratory of Precision Machinery and Electronics, Tokyo Institute of Technology
-
Ikegami K
Tokyo Inst. Technol. Yokohama Jpn
-
Kyogoku Hideki
Eastern Industrial Research Institute Of Hiroshima Prefecture
-
KYOGOKU Hideki
Industrial Research Institute, Hiroshima Prefecture, West
-
Sugibayashi T
Department Of Mechanical System Engineering Faculty Of Engineering Takushoku University
-
Sugibayashi Toshio
Research Laboratory Of Precision Machinery And Electronics Tokyo Institute Of Technology
-
Ikegami Kozo
Research Laboratory Of Precision Machinery And Electrocnics Tokyo Institute Of Technology
-
IKEGAMI Kozo
Research Laboratory of Precision Machinery and Electoronics, Tokyo Institute of Technology
関連論文
- Strength Design of the Adhesive Shaft Joints Connected by a Coupling with Identical Shaft Diameters
- Strength Design of the Adhesive Joint Connecting a Carbon Steel Shaft to a GFRP Tube : 1st Report, A Case of Combined Tensile and Torsional Loads
- Effect of Coupling Shape on the Strength of Adhesive Bonded Joints of Tubular Metal Shafts : Solid-Mechanics, Strength of Materials
- A Study of Molding Method and Static Strength of Carbon Fiber-reinforced Plastic Gear
- Viscoelastic Properties of Resin for IC Plastic Packages and Residual Stress
- Strength Evaluation of Adhesive Shaft Joints
- Strength Evaluation of Scarf Joints Bonded with Adhesive Resin : Solid-Mechanics, Strength of Materials
- Strength Evaluation of Asymmetric Single Lap Joints : 3rd Report, Effects of Mechanical Properties of Adherends
- Strength Evaluation of Asymmetric Single Lap Joints : 2nd Report, Effects of The Taper of Adherends
- Rotating Strength of Laminated Composite Discs
- Strength Evaluation of Asymmetric Single Lap Joints : 1st Report, Effects of the Adherend Thickness
- Effect of Prior Creep Deformation and Temperature Variations on the Plastic Deformation of SUS 304
- Plastic Behavior of SUS 304 Subsequent to Creep Restrain at Various Temperature
- Inelastic Constitutive Equation on the Basis of Distribution Function of Yield Stress : (Basic Equation and Parameter for Work Hardening and Softening)
- EFFECT OF TEMPERATURE VARIATION ON PLASTIC BEHAVIOR OF SUS 304 STAINLESS STEEL
- Effect of Topography on Glossiness and Surface Color for a 5052 Aluminum Alloy
- Experimental Relationships between Surface Roughness, Glossiness and Color of Chromatic Colored Metals
- Evaluation Method of Surface Texture by Surface Roughness based on Geometrical Product Specifications (GPS)
- Study on the High Speed Rotating Disc Reinforced by Laminating and Hoop Winding Method