Strength Evaluation of Adhesive Shaft Joints
スポンサーリンク
概要
- 論文の詳細を見る
The deformation and strength of adhesive shaft joints having shafts of dissimilar metals and a coupling made of various metals was investigated both analytically and experimentally. The strain distributions of these joints under combined loads were analyzed by the finite element method. The strength of the joints was predicted by applying the strength criterion to the adherend, the adhesive layer and their interfaces. The analytical strain distributions were in good agreement with the experimental ones. The effects of the coupling length and thickness on the joint strength were examined. The effects of the Young's modulus of coupling on the joint strength were examined by varying the coupling of metals. The analytical results of strength coincided approximately with the experimental ones, and joint strength could be successfully predicted by the strength criterion.
- 一般社団法人日本機械学会の論文
- 1989-07-15
著者
-
IKEGAMI Kozo
Research Laboratory of Precision Machinery and Electronics, Tokyo Institute of Technology
-
Ikegami K
Tokyo Inst. Technol. Yokohama Jpn
-
Kyogoku Hideki
Eastern Industrial Research Institute Of Hiroshima Prefecture
-
SUGIBAYASHI Toshio
Takushoku University, Faculty of Engineering
-
Sugibayashi T
Department Of Mechanical System Engineering Faculty Of Engineering Takushoku University
-
Sugibayashi Toshio
Takushoku University Faculty Of Engineering
-
Ikegami Kozo
Research Laboratory Of Precision Machinery And Electrocnics Tokyo Institute Of Technology
-
IKEGAMI Kozo
Research Laboratory of Precision Machinery and Electoronics, Tokyo Institute of Technology
関連論文
- Strength Design of the Adhesive Shaft Joints Connected by a Coupling with Identical Shaft Diameters
- Strength Design of the Adhesive Joint Connecting a Carbon Steel Shaft to a GFRP Tube : 1st Report, A Case of Combined Tensile and Torsional Loads
- Effect of Coupling Shape on the Strength of Adhesive Bonded Joints of Tubular Metal Shafts : Solid-Mechanics, Strength of Materials
- A Study of Molding Method and Static Strength of Carbon Fiber-reinforced Plastic Gear
- Viscoelastic Properties of Resin for IC Plastic Packages and Residual Stress
- Prediction of Strength of Stepped-Lap Bonded Joint with Adhesive Resin Under Tensile Shear Load
- Strength Evaluation of Adhesive Shaft Joints
- Strength Evaluation of Scarf Joints Bonded with Adhesive Resin : Solid-Mechanics, Strength of Materials
- Strength Evaluation of Asymmetric Single Lap Joints : 3rd Report, Effects of Mechanical Properties of Adherends
- Strength Evaluation of Asymmetric Single Lap Joints : 2nd Report, Effects of The Taper of Adherends
- Rotating Strength of Laminated Composite Discs
- Strength Evaluation of Asymmetric Single Lap Joints : 1st Report, Effects of the Adherend Thickness
- Effect of Prior Creep Deformation and Temperature Variations on the Plastic Deformation of SUS 304
- Plastic Behavior of SUS 304 Subsequent to Creep Restrain at Various Temperature
- Inelastic Constitutive Equation on the Basis of Distribution Function of Yield Stress : (Basic Equation and Parameter for Work Hardening and Softening)
- EFFECT OF TEMPERATURE VARIATION ON PLASTIC BEHAVIOR OF SUS 304 STAINLESS STEEL
- Effect of Topography on Glossiness and Surface Color for a 5052 Aluminum Alloy
- Experimental Relationships between Surface Roughness, Glossiness and Color of Chromatic Colored Metals
- Evaluation Method of Surface Texture by Surface Roughness based on Geometrical Product Specifications (GPS)
- Study on the High Speed Rotating Disc Reinforced by Laminating and Hoop Winding Method