Deformation and Strength of a Horizontal Reservoir Having an Oval Cross Section
スポンサーリンク
概要
- 論文の詳細を見る
A reservoir supported horizontally and partially by saddles yields a very large deformation. Tolerable limits of the deformation may vary according to the working conditions of a reservoir. In the present paper, the authors tried to find the shape of a reservoir which does not yield too much deformation under partial support condition. Reservoirs having an oval cross section which is formed by three circular arcs are investigated. Stresses in a reservoir and its deformations are found as the solutions of the differential equations for cylindrical shells introduced by one of the present authors. Experimental study is made along with the theoretical analysis. The results show that there exists an optimum oval form which holds the deformation of a reservoir under desired level.
- 一般社団法人日本機械学会の論文
著者
-
Mizoguchi Koki
Department Of Mechanical Engineering University Of Osaka Prefecture
-
Mizoguchi Koki
Department Of Science And Engineering Kinki University
-
Hatsuda Toshio
Mechanical Engineering Research Laboratory Hitachi Ltd.
-
Hatsuda Toshio
Mechanical Engineering Research Laboratory, Hitachi, Ltd.
関連論文
- Strength of a Horizontal Reservoir Supported Partially by Two Saddles in its Cylindrical Part
- Ultimate Strength of Square Tubes Under Bending Loads
- Deformation and Strength of a Horizontal Reservoir Having an Oval Cross Section
- Vibration of a Rotating Cylindrical Shell
- On Fundamental Differential Equations of Vibrations of Cylindrical Shells
- Strength and Deformation of a Cylindrical Shell Fixed at One End and Supported at the Other under the Weight of Lining
- Stress in and Deformation of a Horizontal Reservoir Supported at Both Ends and Partially Filled with a Liquid
- Deformation of and Stress in a Short Pipe Grooved Axially under Torsion
- Stress in and Deformation of a Drum Supported at Both Ends under a Load in the Middle through a Rope
- Vibration of a Cylindrical Shell Containing a Flowing Fluid