予ひずみを受けた軟鋼の多軸塑性挙動と6次後続降伏関数による解析
スポンサーリンク
概要
- 論文の詳細を見る
The subsequent yield function previously proposed by one of the authors is modified by introducing the fourth rank tensor of anisotropic moduli. This yield function accounts for the effects of the third deviatoric stress invariant and anisotropy and the Bauschinger effect. Multiaxial loading tests are carried out on tubular specimens of mild steel subjected to various amounts of torsional prestrain. Two modes of loading are used to assess the theoretical predictions: one is the combined tension- torsion and the other is off-axis torsion by means of the combined loading of compression, internal pressure and torsion. The equi-strain loci and strain behavior are examined as a function of prestrain at three levels of offset strain ranging from 0.002% to 2.0%. In the tension-torsion stress field, the equi-strain locus specified by a 0.002% offset forms a nose in the prestress direction and flattens on the opposite side. The locus expands with increasing offset strain, so that both the sharpness of nose and the degree of flattening decrease. The deviation between the directions of the principal shear stress and principal shear strain increment is determined from the off-axis torsion test. It rises to a maximum value with a change in the principal shear stress direction and then decreases. The maximum deviation is larger when a smaller offset strain is used, and it increases as the prestrain becomes larger. Such behavioral characteristics can be expressed precisely by the constitutive equation derived from the proposed yield function, hardening law and associated flow rule.
- 社団法人日本材料学会の論文
- 2002-07-15
著者
関連論文
- アルミニウム合金亜時効材および過時効材の変形特性 : アルミニウム合金A2024-T8の多軸塑性挙動
- 炭素鋼のひずみ時効等価則
- 軟鋼のバウシンガ効果と加工硬化(焼なまし材と粒状化材の比較)
- 点溶接した低炭素鋼板の疲れ挙動
- 多素材押出し法によるジルコニア/SUS304L鋼3層パイプの成形
- 曲げ試験によるバウシンガ効果と板面異方性の測定
- 軸対称異方性を有する軟鋼の多軸降伏挙動
- 平面ひずみ圧縮におけるアルミニウム単結晶のバウシンガ効果
- 時効を施した軟鋼の塑性変形挙動
- 軟鋼の時効とバウシンガ効果
- 予ひずみを受けた軟鋼の多軸塑性挙動と6次後続降伏関数による解析
- off-axisねじり試験による軟鋼の加工硬化, 異方性およびバウシンガ効果の測定
- 応力時効による軟鋼の強度制御
- 602 反応焼結によるAl基複合材料の開発 : Al_3Ti相におよぼすAl-TiC&Al-TiC-Al_2O_3複合材料の炭素含有量の影響(GS-11 機械材料)
- 軟鋼の応力時効に及ぼす予ひずみの影響-応力時効によるバウシンガ効果の除去-
- アルミニウム合金A2024の多軸強度に及ぼす冷間加工および時効の影響
- 軟鋼の応力時効によるバウシンガ効果の除去
- 603 反応焼結および熱間圧延によるAl-Al_2O_3-TiC系複合材料の成形性(GS-11 機械材料)
- 601 反応焼結および熱間圧延により成形したAl-Al_2O_3-TiB_2系複合材料の機械的性質(GS-11 機械材料)
- 応力時効プロセスにおける軟鋼の多軸降伏挙動
- 応力時効した軟鋼の多軸降伏挙動
- アルミニウム合金A2024-T_6の多軸塑性挙動に及ぼす時効時間の影響
- 613 アルミニウム合金A2024-OおよびT6材の塑性異方性(OS-5 塑性材料の実験と数値解析)
- 比較的低温で応力時効した軟鋼の多軸降伏挙動
- タップ用高速度工具鋼の曲げ—ねじり組合せ負荷下の強度特性