耐熱合金 Inconel 700 のクリープ破断強度と疲労強度に及ぼす高温腐食ふん囲気の影響
スポンサーリンク
概要
- 論文の詳細を見る
Hereunder is reported an experimental study made of the effect that the corrosive environment due to high temperature gives on the stress-rupture strength and the fatigue strength of Inconel 700 which is heat resisting Ni-base alloy. The experiments were carried out in such environments as residual fuel combustion gas, vanadium ash, mixture of vanadium ash and nickel sulfide and their combination at 700° and 750℃. The results are summarized as follows : (1) The strength of the alloy showed a remarkable declining tendency in sulfur-bearing environment. (2) The corrosive effect was found larger on the whole in the fatigue test than in the stress-rupture test. This is presumably due to the fact that the alloy is more sensitive to intergranular corrosion and notches under repeated stress than under static stress. (3) The estimation of the stress-rupture life of this alloy under gradually increasing stress caused by corrosion was investigated by using linear damage rule. The estimated life showed critical value when the corrosive environment is due to sulfur content.
- 社団法人日本材料学会の論文
- 1971-03-15
著者
関連論文
- 鋼構造物における溶接継手部の疲労強度推定
- 425 溶接継手の疲れ限度推定法
- SUS 316切欠き材の高温低サイクル疲労および破面に及ぼす保持時間の影響
- クリープ破断ならびに高温疲労強度に及ぼす切欠きの影響
- 長時間クリープ破断強度を窒素添加により改善した高速増殖炉用 SUS 316 の開発
- 工業用ガスタ-ビン (耐熱材料の選定と高温構造設計) -- (耐熱材料の選定と設計)
- 耐熱合金 Inconel 700 のクリープ破断強度と疲労強度に及ぼす高温腐食ふん囲気の影響
- カスタービン翼用耐熱合金の熱疲労強度に及ぼす材質の変化の影響
- 実働応力疲労に及ぼす負荷条件の影響と推定寿命 : 疲労限度以上の応力を少数回含む場合
- 「新しい工業材料」特集号発刊に際して
- 破壊事故および対策の最近の傾向 : (4)高温機器の環境による損傷と対策(破壊事故の解析と防止対策小特集号)
- ねじ継手におけるねじ山の弾塑性たわみとひずみ集中