シリカフュームコンクリートの力学的特性に関する2, 3の実験
スポンサーリンク
概要
- 論文の詳細を見る
A fundamental research was carried out on silica fume concrete in order to obtain some properties such as workability, air entrainment, porosity, development of strength and durability to ferezing and thawing action. A silica fume containng 85% of silica by weitht, produced in Japan, was used in this study. Three levels of silica fume content, 0,15 and 25% of replacemnt ratio to cement by weight, and five levels of water-to-cementitious materials ratio (W/(C+SF)) from 30% to 70% were chosen. The decrement in slump caused by the incorporation of silica fume was adjusted by the use of superplasticizer. The dosage of superplasticizer needed to keep the same workability as that of the control concrete increased linearly with silica fume content. It is difficult in practice to entrain the air of more than 4% in the mix of low W/(C+SF) ratio where the silica fume replacement ratio is 25%. The optimum replacement ratio of silica fume to cement was 15% as far as the development of strength and the durability to freezing and thawing action were concerned. The air-entrained concrete with the silica fume replacement ratio of 15% showed satisfactory result for durability to freezing and thawing action up to 300 cycles, although the air-entrained concrete with the silica fume replacement ratio of 25% did not show any good result for durability to freezing and thawing action, even though it had the entrained air of 4.4% and W/(C+SF)=50%.
- 1989-08-15
著者
関連論文
- 連続繊維補強材を緊張材としたPC梁の気中と水中における疲労特性
- 連続繊維棒材の付着疲労に及ぼすプレストレスの影響
- CFシートの多層化個別緊張(MLMT)工法によるRCはりの曲げ耐力特性の改善
- 炭素繊維シート緊張接着による RC はりの曲げ補強(複合材料)
- 三次元中空構造ガラス織物を用いた高耐久性埋設型枠の開発
- 3次元中空構造ガラス織物を埋設型枠として使用したRC梁の曲げ特性
- RC柱の補強効果の解析的な検討
- 下水汚泥溶融スラグを細・粗骨材として用いたコンクリートの基礎物性 (特集 建設材料)
- 下水汚泥溶融スラグを粗骨材として用いたコンクリートの基礎物性
- 下水汚泥スラグ粗骨材を用いたコンクリートの力学的特性