ねじ締結体の疲労強度に及ぼす塑性域回転角度法締付の影響

概要

論文の詳細を見る
A series of fatigue tests had been carried out by using standard M9-10・9 bolts in order to show the influence of tightening bolts into yield by the angle-controlled tightening method on the fatigue strength of bolted joints. The tests were conducted with a 5 ton servo fatigue testing machine using a specially designed test fixture capable of subjecting alternating eccentric loads on bolted joints. As the initial bolt prestress was increased to yield, the additional bolt stress transmitted by the equal external alternating load was decreased. For this reason, the endurance limit of the bolted joints tightened to 90 kg/mm^2 became 15% above that of the bolts tightened to 60 kg/mm^2 and 60% above that of the bolts tightened to 20 kg/mm^2. On the other hand, the endurance limit of the bolt became less as the initial bolt prestress was increased. It could be interpreted through the fractographic examination using SEM that the above result was related to the influence of the initial bolt prestress into yield on the early stage of the fatigue crack propagation at the root of the thread groove.
社団法人日本材料学会の論文
1982-07-15