人工軽量骨材コンクリートの締固め(特に振動台によるかた練りコンクリートの締固めについて)

概要

論文の詳細を見る
This paper describes the preparation of vibrating' compaction of concretes by the use of artificial lightweight aggregates, especially the consolidation on a vibrating table for dry mixes. The effects of vibrating frequency, amplitude, acceleration and time on the compressive strength of concrete were investigated. These test results are summarized as follows : - (1) The use of a vibrating table is a more effective method for obtaining consolidation of lightweight concrete in thin sections than internal vibration. (2) The frequency of 3 000 to 5 000 vpm, the amplitude of 0.6 to 1.1mm and the acceleration of 5 to 10 g concerning the vibrator table used for this study are found to be suitable for the compaction of lightweight concrete. (3) The length of time taken in vibration on the table can be somewhat shortened for lightweight concrete, although the optimum condition of compaction is dependent on the shape of the aggregate that was used. (4) When the internal vibrator of a rod type is used for lightweight concrete, vibration of higher frequency is preferred for efficiency. However, the distance between the pair of legs of the plug must be kept as close as possible.
社団法人日本材料学会の論文
1969-02-15