Ti-Ni-(Pd, Ru) 合金の耐食性に及ぼす Cr 添加の影響
スポンサーリンク
概要
- 論文の詳細を見る
General corrosion and crevice corrosion behaviors of titanium alloys, Ti-Ni-(Pd, Ru)-Cr and Ti-Cr have been investigated in comparison with the unalloyed titanium. The specimens of the alloyed and unalloyed titanium were subjected to conventional immersion test in hydrochloric acid solutions and a concentrated chloride solution at elevated temperatures. Electrochemical properties of the alloys were also measured in order to understand the effect of chromium addition on the corrosion behaviors. The results have indicated that an excellent improvement in general corrosion and crevice corrosion resistance is attained by chromium addition with nickel, palladium and ruthenium. However, a single addition of chromium deteriorates the corrosion resistance of titanium in hydrochloric acid solutions. The corrosion kinetics for the alloys is discussed in terms of the compositional change on the corroded surface during the corrosion process. An excellent corrosion resistance of Ti-Ni-(Pd, Ru)-Cr alloy is considered to be originated from enrichment of palladium and ruthenium, which is promoted by chromium addition.
- 1994-04-01
著者
-
屋敷 貴司
(株)神戸製鋼所チタン技術部
-
杉崎 康昭
(株)神戸製鋼所
-
杉崎 康昭
(株)神戸製鋼所材料研究所
-
上田 啓司
(株)神戸製鋼所材料研究所
-
佐藤 廣士
(株)神戸製鋼所材料研究所
-
屋敷 貴司
(株)神戸製鋼所
-
佐藤 廣士
神鋼
関連論文
- 建材用酸洗仕上げ純チタン板の光沢度に及ぼす焼鈍条件の影響
- Al-Mg-Si合金の集合組織形成挙動に及ぼす冷間圧延前組織および冷間圧延率の影響
- 工業用純アルミニウムにおけるFeの析出挙動のモデル化
- 自動車パネル用Al-Mg-Si合金の集合組織形成挙動に及ぼす溶体化処理の影響 (特集 輸送機用材料・機器技術)
- 工業用純アルミニウムの焼なまし時のSiの挙動のモデル化
- Al-Mg-Si系合金の集合組織形成挙動に及ぼすプロセス条件の影響
- 工業用純アルミニウムの析出挙動のモデル化
- 高純度アルミニウム箔の最終焼なまし過程におけるCube方位形成過程
- 高純度アルミニウム箔における Cube 方位形成に及ぼす冷延集合組織の影響
- 高純度アルミニウム箔におけるCube方位形成過程に及ぼす焼純条件の影響
- ダイナミックイオンミキシングによる炭素鋼の低温硼化処理
- チタン--耐食性チタン合金
- 複合イオン注入によるチタンの耐食性改善 (プラズマ・ビ-ム技術特集)
- Ti-Ni-(Pd, Ru) 合金の耐食性に及ぼす Cr 添加の影響
- 製塩装置材料としてのチタンの耐食特性
- イオン注入によるチタンの耐食性改善
- チタン加工技術シリ-ズ-27-防食編-4-腐食事故例とその対策
- チタン加工技術シリ-ズ-23-表面処理編-3-意匠性
- チタン加工技術シリ-ズ-22-表面処理編-2-耐摩耗表面処理技術
- イオン注入による金属の表面改質
- Ti-1.5%Al合金の水素吸収特性の評価
- Al添加によるチタンの耐水素吸収性の改善
- チタンの鋼構造物への直接ライニング技術(第三報)
- チタンの鋼構造物への直接ライニング技術
- チタン建材の変色除去技術
- 外装用チタンパネル向け表面処理塗膜の開発
- 四輪車マフラー用チタン合金の開発
- チタンの表面処理技術
- チタン建材"スーパーAP"
- チタンと異種金属との溶接技術の開発
- チタン建材の経年変色機構
- チタンの耐食性ならびに成形性に及ぼす白金族元素複合添加の影響
- 電気 Ni-P めっきチタン合金の耐摩耗性に及ぼす熱処理の影響
- 423 Zn-Ni 系合金電気めっき鋼板の塗膜ふくれに関する一考察(鋼板の表面性状, 分析・表面処理, 日本鉄鋼協会第 114 回(秋季)講演大会)
- スパッタ法でAl-Mg合金基板上に成膜したAlN薄膜の防食特性および皮膜構造に与える成膜時のArガス圧の影響
- 連続蒸着試験設備により作製した蒸着亜鉛合金めっき鋼板の皮膜構造と耐食性(気相めっき)(表面処理)
- 電気 Zn-Ni 合金めっき層の腐食割れ挙動(腐食)(表面処理)
- 気相コーティングによる皮膜構造と特性(平成 6 年第 127 回春季講演大会, 討論会まとめ)
- 白錆・赤錆
- 自動車用熱延鋼板の耐孔あき腐食性に及ぼす合金元素の影響
- イオン注入による金属の表面改質