Cu 単結晶母相中のα-Fe 粒子の成長に及ぼす外部磁場効果
スポンサーリンク
概要
- 論文の詳細を見る
The effects of magnetic field on the growth of ferromagnetic α-Fe precipitate particles in Cu-1.53mass%Fe alloy single crystals have been examined by the magnetic anisotropy measurement. Specimens aged at 973K for 24h were deformed in tension along the [419] direction to induce the γ→α martensitic transformation in dispersed small Fe precipitate particles. After deformation and successive annealing at 973K under the magnetic field of 1.25MA/m parallel to [110] and [1^^-16^^-] for 30min∿8h, the magnetic anisotropy was examined by measuring magnetic torque around (3<31>^^^-). The torque curves were analyzed theoretically by considering the crystal and shape magnetic anisotropies of the α-Fe particles. It is found that the elongation of α-Fe particles to the [110] direction by annealing is accelerated under the magnetic field parallel to [110] and restrained under the magnetic field parallel to [1^^-16^^-]. These results can be understood by considering the magnetostatic stability of the α-Fe particles.
- 社団法人日本鉄鋼協会の論文
- 1995-06-01
著者
-
藤居 俊之
東京工業大学大学院総合理工学研究科物質科学創造専攻
-
加藤 雅治
東京工業大学大学院総合理工学研究科材料物理科学専攻
-
藤居 俊之
Department Of Innovative And Engineered Materials Tokyo Institute Of Technology
-
加藤 雅治
東京工業大学
-
草鹿 堅吾
東京工業大学大学院
-
草鹿 堅吾
東京工業大学大学院:(現)日本ibm(株)
関連論文
- 弾性相互作用エネルギーと界面エネルギーが析出物の形状と分布に及ぼす影響 : 異方性弾性論による2次元解析
- Ti添加での Excess C 制御による低降伏点鋼の高靭性化
- CuおよびAl単結晶の繰り返し変形に伴う転位組織発達過程
- エネルギー論による転位上優先析出の理解
- 塑性変形と再結晶に及ぼす結晶粒界面方位の影響
- Cu-15 mass%Cr 複相合金圧延材におけるヤング率の異方性
- Cu-Cr合金におけるCr粒子の転位上優先析出
- 入門講座 材料の変形と破壊の熱力学
- 析出物の形状と方位についての弾性ひずみエネルギー考察
- 復相材料の塑性変形のマイクロメカニックスによる解釈
- ZrO_2-3 mol% Y_2O_3超急冷体の時効処理によるミクロ構造変化(セラミックスの微細構造)
- Cu-GeO2分散強化合金多結晶の中間温度脆性
- Cu-15 mass%Cr 複相合金圧延材における引張特性の異方性
- 材料強度学とその周辺 V : 高温変形, 疲労, 破壊
- Fe-2.25Cr-1Mo合金の疲労による内部組織発達過程-温度と歪振幅依存性-
- Cu-Co単結晶からの強磁性体Co粒子の析出・成長に及ぼす外部磁場効果
- 相変態・析出におよぼす応力の影響
- 材料強度学とその周辺 IV : 転位論, 降伏と強化機構
- 材料強度学とその周辺 II : 変形の熱力学と速度論
- 材料強度学とその周辺 I : ひずみ・応力と線形弾性論
- 析出強化型15Crフェライト鋼の強度特性に及ぼすC及びNの影響
- 析出強化型15Cr鋼の衝撃特性に及ぼす熱処理及び化学組成の影響
- 析出強化型15Crフェライト鋼の機械的性質に及ぼすC及びNの影響
- Magnetic Field-Induced Martensitic Transformation of Fe-Co Particles in a Cu Matrix
- やさしい材料強度学(第7回-最終回) : 材料の強さを理解する
- 材料強度学とその周辺VI : 演習問題解答と応用
- 材料強度学とその周辺 III : マイクロメカニックスの基礎
- やさしい材料強度学(第6回) : 材料の強さを理解する
- やさしい材料強度学(第5回) : 材料の強さを理解する
- やさしい材料強度学(第4回) : 材料の強さを理解する
- やさしい材料強度学(第3回) : 材料の強さを理解する
- やさしい材料強度学(第2回) : 材料の強さを理解する
- 3003アルミニウム合金における疲労組織の発達と転位組織図の構築
- やさしい材料強度学(第1回) : 材料の強さを理解する
- 材料強度関係の教科書を執筆して
- 工業材料の微視力学的モデリング : 森記念NSF-IMMシンポジウム
- 331 液相粒子B_2O_3を含む銅単結晶の高温降伏応力(単結晶の機械的性質と変形)
- 銅母相中の鉄微小粒子のマルテンサイト変態におよぼす外力効果
- Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing
- Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding
- Dislocation Bow-Out Model for Yield Stress of Ultra-Fine Grained Materials
- Effects of Grain-Boundary Sliding and Plastic Deformation of Grains on the Formation of Grain-Boundary Cracks in a Double Cylindrical Bicrystal of a Cu-SiO_2 Alloy
- Morphological Evolution of Grain-Boundary SiO_2 in Internally Oxidized Cu-Si Bicrystals
- 米国National Center for Electron Microscopy
- Elastic States of Inhomogeneous Spheroidal Inclusions
- Cu 単結晶母相中のα-Fe 粒子の成長に及ぼす外部磁場効果
- ベ-シック・サイエンス・シリ-ズ(第28回)金属材料の低サイクル疲労
- Low-Cycle Fatigue of Ultrafine-Grained Aluminum at Low Temperatures
- Retardation of Softening of Ultrafine-Grained Copper during Low Temperature Annealing under Uniaxial Tensile Stress
- Morphological and Crystallographic Characteristics of Incoherent Octahedral FCC Co Precipitates in a Cu Matrix
- 弾性変形・塑性変形の基礎
- 私の英語概要づくりノウハウ
- 異相界面の結晶学の幾何学的考察