Forced-Convective Boiling in Small Diameter Tube

スポンサーリンク

概要

• 論文の詳細を見る

• A straight bare tube type evaporator was tested in order to evaluate its feasibility on space applications. Two categories of flow regime were observed during the test. One flow regime indicated a high pressure loss and a slight temperature decrease along the flow direction, and the test results showed a fairly good agreement with the analytical results obtained using a nucleate boiling model. Whereas, the other flow regime showed a contrasting feature of low pressure loss and abrupt temperature rise along the flow direction. In this case also the results obtained on the basis of the analytical model of film boiling showed a fairly good agreement with the experimental results of heat transfer characteristics.

• 宇宙航空研究開発機構の論文

著者

• MIYAZAKI Yoshiro

  Toshiba Corp., Research and Development Center.

• Furukawa Masao

  National Space Development Agency Of Japan

• KURIYMA Yoshio

  Toshiba Corp.

• Miyazaki Y

  Fukui Univ. Technol.

• Miyazaki Yoshiro

  Toshiba Corp.

関連論文

• Pump Assisted Heat Pipe
• Aerodynamic Resistance of Perforated Plates in Natural Convection
• Development of Titanium Heat Pipes for Use in Space
• Heat Transfer Characteristics of Arterial Heat Pipe with Axial Grooves
• Forced-Convective Boiling in Small Diameter Tube
• Off-Design State Predictions of a Commonly Configured Loop Heat Pipe
• High Capacity Heat Pipe with Axial Grooves
• Development of a Two-Phase Cold Plate

スポンサーリンク