Effects of Boron Nitride Filler Loading to Epoxy Resins on Thermal Conductivity and Dielectric Breakdown Strength
スポンサーリンク
概要
- 論文の詳細を見る
- 2011-01-27
著者
-
小迫 雅裕
九州工大
-
KOZAKO Masahiro
Kyushu Institute of Technology
-
Kozako Masahiro
Kagoshima National Coll. Technol. Kirishima
-
Tanaka Toshikatsu
Ips Graduate School Waseda University
-
Tanaka Toshikatsu
Waseda Univ. Kitakyushu
-
OHKI Yoshimichi
Waseda University
-
Ohki Yoshimichi
Dep. Of Electrical Engineering And Bioscience Waseda Univ.
-
WANG Zengbin
Waseda University
-
IZUKA Tomonori
Waseda University
-
Ohki Yoshimichi
Waseda Univ. Tokyo Jpn
関連論文
- ナノ/マイクロ複合粒子を充填したエポキシ樹脂の熱伝導性および電気絶縁性の予備的検討
- いくつかの生分解性高分子の部分放電劣化
- 原子時計による高精度同期を用いた部分放電位置標定装置の現地適用に向けた基礎検討 (誘電・絶縁材料 電線・ケーブル合同研究会 電線・電力ケーブル・電力機器の劣化診断とアセットマネジメント)
- GISの異径母線部が部分放電放射電磁波伝搬特性に及ぼす影響
- 高熱伝導化を見据えたエポキシ・アルミナコンポジットの試作と評価
- モデル変圧器油中部分放電放射電磁波伝搬特性に巻線が及ぼす影響
- 実変圧器タンクモデル内部における部分放電放射電磁波伝搬特性
- 時間領域差分法による油入変圧器内の部分放電放射電磁界解析
- 変圧器内部の複合絶縁構造を模擬した電極モデルにおける部分放電特性
- 油入変圧器内における有限要素法を用いた部分放電放射超音波伝搬特性の基礎的検討
- 部分放電による変圧器油中分解ガス定量化に関する基礎的検討
- Approach by Nano- and Micro-filler Mixture toward Epoxy-based Nanocomposites as Industrial Insulating Materials
- Effects of Epoxy/Filler Interface on Properties of Nano- or Micro-composites
- エポキシ/アルミナナノコンポジットの部分放電劣化における電界強度の検討
- 各種フィラーを用いたエポキシナノコンポジットの耐部分放電性の評価
- アクリルゴムを使用した積層型ポリマーアクチュエータの試作
- ポリマーアクチュエータの動作特性における事前引張の影響
- UHF法で測定された電磁波第一波の振幅比に基づくGIS絶縁異常の診断
- Risk Assessment of GIS Based on Amplitude Ratio of PD-induced Electromagnetic Wave Measured by UHF Method
- ラム波解析に基づいたGIS内自由金属異物の位置標定システムの構築
- Research for switching phenomena in university
- エポキシ樹脂におけるインパルス絶縁破壊強度のナノシリカ添加依存性
- Treeing Phenomena in Epoxy/Alumina Nanocomposite and Interpretation by a Multi-core Model
- Preparation and Various Characteristics of Epoxy/Alumina Nanocomposites
- Filler-content Dependence of Dielectric Properties of Low-Density Polyethylene/MgO Nanocomposites
- Voltage Zero-crossing as a Factor Inducing Water Trees
- Identification of Partial Discharge Location Based on Propagation Properties of Acoustic Waves in GIS
- 電力用変圧器内油ダクト中の部分放電放射電磁波伝搬特性およびセンサ特性比較
- 絶縁油の帯電特性と導電特性に関する基礎検討
- 電力ケーブルにおける原子時計とGPSを用いた3ch部分放電位置標定システムの開発と検証
- 油入変圧器内の超音波伝搬特性を考慮した部分放電位置標定システム開発の基礎的検討
- 回転機絶縁診断高度化に向けた微小ループ型電磁波センサ開発と部分放電検出評価
- Effects of Boron Nitride Filler Loading to Epoxy Resins on Thermal Conductivity and Dielectric Breakdown Strength
- Effects of Temperature and Crystallinity on Partial Discharge Resistance of Poly-L-lactic Acid
- 電力ケーブルにおける部分放電位置標定システムの高機能化と現地適用に向けた検討
- 原子時計による高精度同期を用いた部分放電位置標定装置の現地適用に向けた基礎検討
- Comparison of degradation between all-aromatic and thermoplastic polyimide films
- Influence of Nano-fillers on Initial Trees in Epoxy/Silica Nanocomposite
- 電気・光学同期計測によるSF_6ガス中部分放電現象の印加電圧極性差の検討
- インバータサージ部分放電測定における繰り返しインパルス電圧発生装置の構築と特性評価
- 電力用変圧器モデルにおける部分放電放射電磁波の検出感度が巻線により受ける影響
- 数値計算を用いた電力用変圧器内の超音波伝搬解析と部分放電位置標定手法の検討
- 変圧器モデルにおけるUHF法による部分放電測定
- 油入変圧器内の音響的部分放電位置標定システムの実験的検証と評価
- シリコーンゴムナノコンポジットの試作とナノフィラー分散状態の定量的評価
- チタニアナノコンポジット耐コロナ巻線の部分放電特性
- 高耐熱コンタクトプローブを用いたSiCショットキーバリアダイオードの電流-電圧特性評価用試験装置開発
- X線照射によるエポキシ樹脂中の人工ボイド内部分放電特性の検討
- エポキシ樹脂中ボイド放電におけるX線照射効果の物理的考察
- エポキシモールド絶縁システム中の人工ボイド内部分放電現象の検討
- 屋外絶縁用ナノベーマイトアルミナ充填シリコーンゴムの創製とその特性の基礎的検討
- 電力ケーブルにおける部分放電位置標定システムの高機能化と現地適用に向けた検討
- エポキシ樹脂ナノコンポジットの誘電特性に与えるナノフィラーの種類の影響
- モールド絶縁における微小空気ギャップの絶縁特性
- Electron Trap Parameters in the TiO_2/PAI Nanocomposites Loaded with Different Size Fillers
- Structural Origin of Dimensional Effect on Dielectric Breakdown Strength of ZnO Vraistors
- カーボンナノチューブ分散エポキシ樹脂コーティングの基礎的検討
- インバータサージ部分放電測定における繰り返しインパルス電圧発生装置の構築と特性評価
- Influence of Nano-fillers on Initial Trees in Epoxy/Silica Nanocomposite
- Influence of Nano-fillers on Initial Trees in Epoxy/Silica Nanocomposite
- Effects of Boron Nitride Filler Loading to Epoxy Resins on Thermal Conductivity and Dielectric Breakdown Strength
- Effects of Boron Nitride Filler Loading to Epoxy Resins on Thermal Conductivity and Dielectric Breakdown Strength
- Space Charge Formation in Polyimide Film under High DC Voltage at High Temperatures
- Effects of coating of epoxy/CNT composites on surface flashover characteristics
- Effects of Addition of Nano-scale Silica Filler on Erosion, Tracking Resistance and Hydrophobicity of Silicone Rubber
- Numerical Analysis of PD emitted Electromagnetic wave propagation in Oil-immersed Transformer
- Effects of coating of epoxy/CNT composites on surface flashover characteristics
- Toward Understanding the Role of Surface Modification of AlN Particles on the Thermal Conductivity of Epoxy Composites
- Partial discharge characteristics in epoxy cast molding insulation system by X-ray irradiation
- Partial discharge characteristics in epoxy cast molding insulation system by X-ray irradiation
- Numerical Analysis of PD emitted Electromagnetic wave propagation in Oil-immersed Transformer