Application of Orthogonal Array Tests Method to Optimize Operating Conditions for Iron Ore Sintering

スポンサーリンク

概要

• 論文の詳細を見る

• The objective of this study was to determine optimal operation parameters for increasing iron ore sinter productivity (SP) and sinter strength (SS) during sintering process by using the orthogonal array test method, and examine their emissions. Three operating parameters, including the water content (Wc; range=6.0–7.0 mass%), suction pressure (Ps; range=1000–1400 mmH2O), and bed height (Hb; rang=500–600 mm) were selected for conducting experiments in a pilot-scale sinter pot to simulate various sintering operating conditions of a real scale-sinter plant. We found the resultant optimal combination (Wc=7.0 mass%, Ps=1400 mmH2O, and Hb=500 mm) could increase SP up to 20.2% in comparison with the current operating condition of a real-scale sinter plant (Wc=6.5 mass%, Ps=1200 mmH2O, and Hb=550 mm). The results of the ANOVA analysis indicates that Wc and Ps were the two significant parameters (p<0.05) accounting for 50.3% and 36.7% of the total contribution of the three selected parameters, respectively. The SS of the resultant optimal combination shows no significant difference (only increased 2.2%) as compared with the current operating condition of the selected real-scale sinter plant. By examining the emissions of SOx, NOx, and particulate matters, the values obtained from the optimal combination were quite comparable to those of the current operating condition. The above results further confirm the applicability of the obtained optimal combination for the real-scale sinter production.

• 社団法人 日本鉄鋼協会の論文
• 2009-05-15

著者

• CHEN Yu-Cheng

  Department of Materials Science and Engineering, National Tsing Hua University

• Tsai Perng-jy

  Department Of Environmental And Occupational Health Medical College National Cheng Kung University:s

• Tsai Perng-jy

  Department Of Environmental And Occupational Health College Of Medicine National Cheng Kung Universi

• Sun Yi-min

  Department Of Occupational Safety And Health Chung Hwa University Of Medical Technology

• MOU Jin-Luh

  Steel & Aluminum R&D Department, China Steel Corporation

• Mou Jin-luh

  Steel & Aluminum R&d Department China Steel Corporation

• Chen Yu-cheng

  Department Of Environmental And Occupational Health Medical College National Cheng Kung University

関連論文

• Mass, Number and Surface Area Concentrations of α-Quartz Exposures of Refractory Material Manufacturing Workers
• Sol-Gel Derived Pb(Zr, Ti)O_3 Heterolayered Films by Single-Annealing
• 表面加工産業従事作業者における尿中クロミウムの濃度の分析における吸入可能な6価クロムの曝露の利用
• Use of Inhalable Cr^ Exposures to Characterize Urinary Chromium Concentrations in Plating Industry Workers
• Characteristics of Exposure Profiles for Workers Exposed to Airborne Dusts and Polycyclic Aromatic Hydrocarbons (PAHs) in the Carbon Black Manufacturing Industry
• Application of Orthogonal Array Tests Method to Optimize Operating Conditions for Iron Ore Sintering
• Optical Line Scan Inspection System for Pseudo-particle Analysis
• 労働者の温熱障害算定のための温熱環境実験室の有効性評価(英文論文の和文要旨)
• Evaluating the Efficacy of a Thermal Exposure Chamber Designed for Assessing Workers' Thermal Hazard
• An Integrated Approach to Initiate Preventive Strategies for Workers Exposed to Teflon Pyrolytic Gases in a Plastic Industry
• Exposure Assessment on Volatile Organic Compounds (VOCs) for Tollway Station Workers via Direct and Indirect Approaches
• Occupational Stress in Nurses in Psychiatric Institutions in Taiwan
• Sol-Gel Derived Pb(Zr,Ti)O3 Heterolayered Films by Single-Annealing

もっと見る 閉じる

スポンサーリンク