Characteristics of Fine Oxide Particles Produced by Ti/M (M=Mg and Zr) Complex Deoxidation in Fe-10mass%Ni Alloy
スポンサーリンク
概要
- 論文の詳細を見る
Characteristics of oxide particles produced by Ti/M (M=Mg and Zr) complex deoxidation have been studied in an Fe–10mass%Ni alloy as a function of holding time at 1600°C, followed by quenching. The size distributions for the particles having different compositions are compared with the particle size distribution in single deoxidation with Ti, Mg or Zr. In most experiments the composition of particles precipitated during rapid quenching was found to be non-equilibrium phase. The formation mechanism of primary and secondary deoxidation particles and the difference in the compositions of non-clustered and clustered particles are discussed. The effects of Ti addition, method of deoxidation and holding time at 1600°C on particle size distributions in Ti/M complex deoxidation experiments are studied.
- 社団法人 日本鉄鋼協会の論文
- 2008-11-15
著者
-
Suito Hideaki
Tohoku Univ. Miyagiken Jpn
-
Karasev Andrey
Institute Of Multidisciplinary Research For Advanced Materials Tohoku University
-
Karasev Andrey
Institute For Advanced Materials Processing Tohoku University
-
Karasev Andrey
Institute Of Multidisplinary Research For Advanced Materials Tohoku University
関連論文
- Effect of Oxide Catalyst on Heterogeneous Nucleation in Fe-10mass%Ni Alloys
- Quantitative Analysis of Total and Insoluble Elements and Inclusion Composition in Metal by Laser Ablation ICP-MS Method
- Analysis of Composition and Size Distribution of Inclusions in Fe-10Mass%Ni Alloy Deoxidized by Al and Mg Using Laser Ablation ICP Mass Spectrometry
- Analysis of Size Distribution of Inclusions in Metal by Using Single-particle Optical Sensing Method
- Measurement of Inclusion Size by Laser Ablation ICP Mass Spectrometry
- Effect of Particle Size Distribution on Austenite Grain Growth in Fe-0.05mass%C Alloy Deoxidized with Mn-Si, Ti, Mg, Zr and Ce
- Phosphorous Partition between 2CaO・SiO_2 Particles and CaO-SiO_2-Fe_tO Slags
- Thermodynamics of Zirconium Deoxidation Equilibrium in Liquid Iron by EMF Measurements
- Size Distribution of Deoxidation Products with Ti, Pr and Ti/Pr in Fe-10mass%Ni Alloy
- Nitride Precipitation on Particles in Fe-10mass%Ni Alloy Deoxidized with Ti, M(M=Mg, Zr and Ce) and Ti/M
- Grain-growth-inhibiting Effects of TiC and ZrC Precipitates in Fe-0.15-0.30mass%C Alloy
- Characteristics of Fine Oxide Particles Produced by Ti/M (M=Mg and Zr) Complex Deoxidation in Fe-10mass%Ni Alloy
- Effect of TiN Precipitates on Austenite Grain Size in Fe-1.5%Mn-0.12%Ti-Si(
- Effects of Oxide Particles and Solute Elements on Austenite Grain Growth in Fe-0.05mass%C and Fe-10mass%Ni Alloys
- Effect of Oxide Particles on δ/γ Transformation and Austenite Grain Growth in Fe-0.05-0.30%C-1.0%Mn-1.0%Ni Alloy
- Simultaneous Determination of the Composition and Size of Oxide Particles in Solid Materials by Laser Ablation-Inductively Coupled Plasma Mass Spectrometry
- Influence of Oxide Particles and Residual Elements on Microstructure and Toughness in the Heat-Affected Zone of Low-Carbon Steel Deoxidized with Ti and Zr
- Effects of Soluble Ti and Zr Content and Austenite Grain Size on Microstructure of the Simulated Heat Affected Zone in Fe-C-Mn-Si Alloy
- Application of Laser Ablation ICP Mass Spectrometry for Analysis of Oxide Particles on Cross Section of Alloys and Steels
- Extraction of Nonmetallic Inclusion Particles Containing MgO from Steel
- Effect of Multi-phase Oxide Particles on TiN Crystallization and Solidification Structure in Ti-Added Ferritic Stainless Steel