Corrosion Resistance of Cr-bearing Rebar in Concrete with Chloride Ion Content
スポンサーリンク
概要
- 論文の詳細を見る
As a fundamental study on the performance of Cr-bearing rebars in steel reinforced concrete structures exposed to corrosive environments, The test specimens were made by installing 8 types of rebars in concretes with a chloride ion content of 0.3, 0.6, 1.2, 2.4 and 24 kg/m3. Corrosion accelerated curing were then conducted with them. The corrosion resistance of Cr-bearing rebars was examined by measuring crack widths, half-cell potential, corrosion area and weight loss after 155 cycles of corrosion- accelerating curing.The results of the study showed that the corrosion resistance increased as the Cr content increased regardless of the content of chloride ions, and that the Cr-bearing rebars with a Cr content of 5% and 9% showed high corrosion resistance in concretes with a chloride ion content of 1.2 and 2.4 kg/m3, respectively.
- 社団法人 日本鉄鋼協会の論文
- 2006-07-15
著者
-
Noguchi Takafumi
Department of Architecture, Faculty of Engineering, University of Tokyo
-
Lee Han-seung
School Of Architecture & Architectural Engineering Hanyang University
-
TAE Sung-Ho
Sustainable Building Research Center, Hanyang University
-
TAE Sung-Ho
Research Center for Technological Innovation on Sustainable Building, Hanyang University
-
UJIRO Takumi
Stainless Steel Research Department, Steel Research Laboratory, JFE Steel Corporation
-
SHIN Sung-Woo
School of Architecture & Architectural Engineering, Hanyang University
-
Tae Sung‐ho
Sustainable Building Research Center Hanyang University
-
Ujiro Takumi
Stainless Steel Research Dept. Steel Research Laboratory
-
Shin Sung-woo
School Of Architecture & Architectural Engineering Hanyang University
-
Noguchi Takafumi
Dep. Of Architecture Fac. Of Engineering The Univ. Of Tokyo
-
Noguchi Takafumi
Department Of Architecture Faculty Of Engineering The University Of Tokyo
-
Ujiro Takumi
Steel Reasearch Lab. Jfe Steel Corp.
-
LEE Han-Seung
School of Architecture & Architectural Engineering, Hanyang University
関連論文
- Evaluation of Mechanical Performance of Corroded Reinforcement Considering the Surface Shape
- Potential and Current Flow of Double Steel Bars in Concrete by 2-D BEM
- Corrosion Resistance of Cr-bearing Rebar to Macrocell Corrosion Caused by Concrete Cover Crack
- Corrosion Resistance of Cr-bearing Rebar in Concrete with Chloride Ion Content
- Evaluation of Mechanical Performance of Corroded Reinforcement Considering the Surface Shape
- Service Life Estimation of Reinforced Concrete Structures Made Using Cr-bearing Rebars in Microcell Corrosion Environments
- Formulation of a Nondestructive Technique for Evaluating Steel Corrosion in Concrete Structures
- Mathematical Modeling for Corrosion Environment Estimation Based on Concrete Resistivity Measurement Directly above Reinforcement
- A Study on the Corrosion Resistance of Cr-bearing Rebar in Mortar in Corrosive Environments Involving Chloride Attack and Carbonation
- Environmental Influence on the Corrosion Rate of Steel Bars Embedded in Concrete
- Service Life Estimation of Concrete Structures Reinforced with Cr-bearing Rebars under Macrocell Corrosion Conditions Induced by Cracking in Cover Concrete
- Corrosion Inhibition by Cr-bearing Rebar in Concrete Due to Combined Deterioration of Carbonation and Chloride Attack
- Corrosion Resistance of Cr-bearing Rebar in Macrocell Corrosion Environments Due to Different Concentrations of Chloride Ions
- Effects of Alloying Elements on NaCl-induced Hot Corrosion Resistance of Stainless Steels
- Corrosion Resistance of Cr-bearing Rebar in Simulated Concrete Pore Solutions
- Tensile Properties of Chromium-bearing Extra Low Carbon Steel Sheets
- Corrosion Evaluation by Estimating the Surface Resistivity of Reinforcing Bar