人工鉱床構想 : Reserve to Stock の考え方とその運用に関する提案
スポンサーリンク
概要
- 論文の詳細を見る
The condition for material recycling in our country is gradually improving. However, even the current recycling rate of base metals easier to process than rare metals, is not enough. Though several suggestions have been made to improve this situation, they could not be implemented due to restrictions caused by the legal context such as the Waste Disposal Law. Also, in many cases, recycling of materials was limited due to its high treatment costs. If this situation continues to prevail, valuable metal resources indispensable for advanced technology will be lost permanently. And the toxic metals associated with valuable metals will pollute our country gradually. In order to improve the recycling rate and to prevent the diffusion of contaminants, we propose a new system taking various aspects of metal recycling into consideration. This system is based on the concept of "artificial mineral deposit". This system is a paradigm change on the way we look at waste products, as the stockpiled recycling metal is treated as ore deposit. The new system will allow various possibilities of further metal recycling and reduce environmental impact tremendously.
- 社団法人 資源・素材学会の論文
- 2006-07-25
著者
関連論文
- TEM観察によるスコロダイト生成機構の検討
- WEEE中の金属リサイクルに関する研究 : 金属含有量インベントリ作成のための調査2
- Vapor Pressure of Zinc and Zinc Chloride in the Fe_tO-CaO-SiO_2-Al_2O_3 Slag System
- Vaporization Behavior of Zinc from the FeO-CaO-SiO_2-Al_2O_3 Slag System
- Thermodynamic Predictions on the Vaporization Behaviors of Zn/Pb from FeO-CaO-SiO_2-Al_2O_3-Fe_2O_3 Slag System
- Vapor Pressure Measurements for Metal Chloride Systems by the Knudsen Effusion Method
- 環境
- 鉄鋼および化学産業におけるフッ素のマテリアルフロー(リサイクル技術の環境評価)(Part-2. 鉄鋼業と循環型社会)(鉄の技術と文化および循環型社会)
- (7) 界面物性と金属製錬プロセス(主題 : 素材・材料プロセスに係わる物性と評価)(素材工学研究所第 6 回研究懇談会)(素材工学研究会記事)
- (3) 素材再生における金属製錬業の役割(主題 : 「素材再生のためのプロセスと評価」)(第 1 回素材再生プロセス研究センター研究懇談会)(素材工学研究会記事)
- 3学協会共同企画シンポジウムの報告
- 製鋼出すとの乾式処理プロセス
- 亜鉛電熱蒸留プロセスのエネルギー解析
- (2) スラグの物性と非鉄製錬における界面現象(主題 : 非鉄製錬プロセスとスラグの特性)(第 37 回非鉄金属製錬研究懇談会)(選鉱製錬研究会記事)
- 溶湯成分に及ぼすアルミニウムUBCの塗料除去効果
- メタルロンダリングによる使用済みアルミニウム缶のリサイクルプロセス
- 持続可能な発展のための我が国の金属資源戦略
- 小型家電品関連の収集システム・処理技術に関する欧州調査報告
- 使用済み小型電気・電子機器の回収試験と回収量評価
- 小型家電のリサイクル : 人工鉱床の展開
- 都市鉱山から人工鉱床への展開
- ダスト系廃棄物からの資源回収における高温炉の役割 (環境特集号(その4)鉄鋼を中心とした高温冶金反応と環境技術)
- 金属素材リサイクルのシステムと技術(リサイクルはどこまで可能か)
- スラグ中の有害元素の解析と制御 (特集 複雑な物質・材料解析への新たなアプローチ)
- 非鉄金属製錬の現状と課題
- 超音波で挙動制御したマイクロバブルによるフェリハイドライトの高速浮上分離に関する基礎的研究
- 焼成法による溶融飛灰の無害化機構
- 金属リサイクルの現状と課題
- 人工鉱床構想 : Reserve to Stock の考え方とその運用に関する提案
- マテリアルリースと循環型社会 : 2)素材の再生技術の現状とマテリアルリース技術
- 溶融塩-スラグ間の重金属の分配挙動
- 溶融飛灰処理のための塩化揮発実験
- 都市ゴミ焼却飛灰処理の最近の技術動向
- 溶銅の脱酸と副次効果
- Zn-Fe-O系の熱力学から見た電気炉ダスト処理
- 非鉄製錬から見た廃棄物処理と重金属の資源化 (特集 素材製造プロセスにおける環境・エネルギー対策の現状と課題)
- Thermodynamic Properties of Polybrominated/chlorinated Dibenzo-p-dioxins Calculated by Density Functional Theory
- Thermodynamic Properties of Polybrominated Dibenzo-p-dioxins and Dibenzofurans Calculated by Density Functional Theory
- Vapour Pressure Determination for PCDD/Fs by Knudsen Effusion Method
- The Construction and Testing of a New Apparatus with Knudsen Effusion Method Designed for Low Vapor Pressure Measurements of POPs
- Vapour Pressure Determination for Dibenzo-p-dioxin, Dibenzofuran, Octachlorodibenzo-p-dioxin and Octachlorodibenzofuran Using a Knudsen Effusion Method
- Calculation of Thermodynamic Properties of Polybrominated Dibenzen-p-dioxins Using Molecular Orbital Method with Density Functional Theory
- DIOXIN EMISSIONS IN RECYCLING PROCESSES OF METALS
- イオン化蒸着法で作製したDLC膜のAl-Mg合金に対する摩擦・摩耗特性
- Measurement of Thermodynamic Functions of Solid Phase for DD, DF,OCDD and OCDF, and Estimation of Thermodynamic Functions of Gas Phase for PCDD/Fs Using Molecular Orbital Method with Density Functional Theory
- 高温反応炉におけるダイオキシン発生防止技術の概説
- 酸化鉄含有スラグ-高炭素濃度溶鉄間反応におけるスラグの泡立ち現象
- 水-油界面におけるエマルジョンの生成と相分離 (素材小特集-3-素材製造プロセシング)
- Determination of Vapor Pressures of PCDD/Fs by Kundsen Method
- 活性化反応性蒸着法(ARE)によるTi-Al-N系皮膜の形成
- ARE法で作製した(Ti, Al)N膜の酸化挙動
- Ag-Zn合金のH_2S雰囲気中における耐硫化性のメカニズム
- Zn蒸気の酸化反応速度について
- Zn蒸気の酸化反応に関する研究
- イオンクロマトグラフィーによる銅電解液中のセレン酸及び亜セレン酸の定量
- イオンクロマトグラフィーによる地熱熱水及び銅電解液中のヒ酸及び亜ヒ酸イオンの定量
- 153 製鋼反応に対する光学的塩基度の応用(熱力学・物性, 製銑・製鋼共通, 日本鉄鋼協会第 110 回講演大会)
- 粘土鉱物による廃水中の重金属除去
- 硫化第1銅の酸化焙焼について
- Study on Fabrication of Titanium Oxide Films by Oxygen Pressure Controlled Pulsed Laser Deposition
- 木炭による溶銅の脱酸
- 削減可能性の高い廃棄物の調査にもとづく製鉄プロセスを用いたリサイクル可能性の検討(社会・環境)
- Partial Sulfurization of Laser-ablated Titanium Oxide Film for the Improvement in Photocatalytic Property
- 鉄鋼産業における廃プラスチック利用のライフサイクルインベントリとコスト評価(リサイクル技術の環境評価)(Part-2. 鉄鋼業と循環型社会)(鉄の技術と文化および循環型社会)
- 特別講演 環境に優しい銅リサイクルのために--伸銅材料のリサイクルの考え方
- 素材製造プロセスにおける環境問題解決に向けての総合的な取り組み (特集2 素材製造プロセスにおける環境・エネルギー対策)
- 金属系廃棄物を用いる石油からの硫黄固定および水素生成に関する基礎的研究
- ゲーサイトを用いる硫化水素からのイオウ固定と水素生成
- COSMO-RS法によるPCBの平衡蒸気圧の推算
- ASR溶融炉排ガス中におけるダイオキシン類生成に関する熱力学計算シミュレーション
- 排ガス中における臭素系ダイオキシン類の生成に関する多成分平衡熱力学計算
- Severe erosive arthropathy requiring surgical treatments in systemic lupus erythematosus
- 廃棄物学会賞受賞者記念講演(論文賞) 平成16年度廃棄物学会論文賞 溶融塩-スラグ間の重金属の分配挙動
- 銅精鉱の酸浸出に及ぼすマイクロ波による加熱処理の影響
- レーザー顕微鏡を用いた素材プロセスのその場観察
- ダスト保管に含銅鋳鉄容器を用いる方法
- 高電流密度銅電解プロセスについて
- Zn電解採取におけるSb, Cd, Niの影響
- 小型家電の回収システムの提案と技術開発
- O-C2 Angle as a Predictor of Dyspnea and/or Dysphagia After Occipitocervical Fusion
- Atlantoaxial Transarticular Screw Fixation With Posterior Wiring Using Polyethylene Cable : Facet Fusion Despite Posterior Graft Resorption in Rheumatoid Patients
- Vertebral Artery Injury During Cervical Spine Surgery : A Survey of More than 5600 Operations
- PCBの平衡蒸気圧の測定とオルト位塩素が蒸気圧に及ぼす影響
- レアメタルの資源とリサイクルの役割
- The Role of Foaming Agent in Structure and Mechanical Performance of Al Based Foams
- The Clinical Risk of Vertebral Artery Injury From Cervical Pedicle Screws Inserted in Degenerative Vertebrae
- Transpedicular Screw Placement Evaluated by Axial Computed Tomography of the Cervical Pedicle
- On-line Corrosion Product Monitor for Monitoring of Corrosion Products in the Secondary Side of Pressurized Water Reactors (PWRs)
- ソノケミストリー ナノカーボン材料の新規製造プロセスの開発--有機溶媒中の超音波放電プラズマによるナノカーボンの生成
- Atlantoaxial Transarticular Screw Fixation for a High-Riding Vertebral Artery
- Cervical disc herniation causing localized ipsilateral popliteal pain
- Pseudoaneurysm of the Deep Circumflex Iliac Artery : A Rare Complication at an Anterior Iliac Bone Graft Donor Site
- ICONE11-36078 Verification of Applicability of High Bundle Flush for an Actual Steam Generator
- Development of New Foaming Agent for Metal Foam
- インジウムをめぐる最近の動向と将来方向 (特集 レアメタルをめぐる動向--逼迫問題対策と最新技術を探る)
- 金属資源の現状と循環使用 (特集 地域と世界に貢献する東北大学多元物質科学研究所)
- In の資源動向と3R技術
- レアメタル資源戦略と濃縮・回収技術
- 焙焼・か焼
- 溶融アルミニウム合金中のSi除去 (計算材料工学とその応用特集)