SATURATION CARRYING CAPACITY OF GAS AND FLOW REGIMES IN CFB
スポンサーリンク
概要
- 論文の詳細を見る
This paper presents a generalized approach to the saturation carrying capacity of gas, Gs*, in high-velocity fluidized beds. Starting from discussion of the variation of solid holdup in the dense region of circulating fluidized beds (CFBs) with the solid circulation rate, we defined the saturation carrying capacity of gas, Gs*, as the solid circulation rate at which a maximum achievable or saturation solids concentration at the dense region of the CFB starts to be reached. It has been experimentally demonstrated that above Gs*, solid concentrations in the dense region are really independent of changes in the solid circulation rate, the riser diameter, solids feeding system and the solids inventory, and a characteristic S-shaped axial solid holdup distribution would be observed. Based on this physical phenomenon, the saturation carrying capacity of gas was determined as functions of gas velocity and gas-solid properties, and a generalized correlation was therefore proposed on the basis of collected literature data. Finally, a flow diagram in which the flow conditions for occurring of S-shaped and exponential profiles of solids holdup was presented.
- 社団法人 化学工学会の論文
著者
-
Kato Kunio
Department Of Applied Quantum Physics And Nuclear Engineering Kyushu University
-
Kato Kunio
Department Of Biological And Chemical Engineering Guma University
-
BAI Dinglong
Department of Biological and Chemical Engineering Guma University
関連論文
- Study on Effective Average (γ, n) Cross Section for ^Y, ^Zr, ^Nb, and ^Cs and (γ, 3n) Cross Section for ^Tc
- Semi-dry Process for Production of Very Fine Calcium Carbonate Powder by a Powder-Particle Spouted Bed
- Total Solid Entrainment Rate in a Circulating Powder-Particle Fluidized Bed
- Entrainment Rates and Elutriation Rate Constants of Bed Particles and Group C Fine Powder in a Fluidized Bed and in a Circulating Fluidized Bed
- EFFECTIVE DRY DESULFURIZATION BY A POWDER-PARTICLE FLUIDIZED BED
- AXIAL DISTRIBUTION OF SOLID HOLDUPS IN BINARY SOLIDS CIRCULATING FLUIDIZED BEDS
- SEGREGATION OF PARTICLES IN BINARY SOLIDS CIRCULATING FLUIDIZED BEDS
- PARTICLE HOLD-UP AND ELUTRIATION RATE IN THE FREEBOARD OF FLUID BEDS
- OPERATIONAL RANGE FOR CONTINUOUS DRYING OF FINE-PARTICLE SLURRY AND FORMATION OF AGGLOMERATES IN A POWDER-PARTICLE FLUIDIZED BED
- CONTINUOUS DRYING OF A FINE PARTICLES-WATER SLURRY IN A POWDER-PARTICLE FLUIDIZED BED
- Process Analysis of Semidry Desulfurization Process in Powder-Particle Spouted Bed
- Removal Efficiency of the Combined Desulfurization/Denitration Process Using Powder-Particle Fluidized Bed
- Characteristics of Pressure with Respect to Heterogeneous Flow Structure in Fluidized Beds
- Hold-Up of Fine Particles in a Powder-Particle Spouted Bed
- THERMAL ANALYSIS IN A CHANNEL BETWEEN VERTICAL ELECTRONIC CIRCUIT BOARDS COOLED BY FORCED CONVECTION
- FORCED CONVECTIVE HEAT TRANSFER FROM A CHANNEL BETWEEN VERTICAL ELECTRONIC CIRCUIT BOARDS
- ELUTRIATION OF FINE POWDERS FROM A FLUIDIZED BED OF A BINARY PARTICLE-MIXTURE
- Minimum Fluidization Velocity of Binary Particle Mixtures with Adhesive Fine Powder
- Estimation of the Critical Particle Size of Elutriation of Very Small Particles from Fluidized Bed
- Elutriation of Very Fine Particles from Fluidized Bed-Effect of Mean Diameter Bed Particles
- Penetration of fine cohesive powders through a powder-particle fluidized bed
- Limiting Efficiency for continuous Drying of Microparticle Slurries in a Powder-Particle Spouted Bed
- Effect of electrostatic and capillary forces on the elutriation of fine particles from a fluidized bed
- Physical Properties of Lime Powder Produced by Powder-Particle Fluidized Bed
- Calcination of Fine Limestone Particles by a Powder-Particle Fluidized Bed
- SATURATION CARRYING CAPACITY OF GAS AND FLOW REGIMES IN CFB
- Heat transfer in a channel between vertical electronic circuit boards cooled by natural air convection.
- Effect of natural convection on laminar flow heat transfer in horizontal circular tubes.
- Lateral solid mixing in a packed fluidized bed.
- Gas-particle heat transfer in a dispersed bed.
- Mass transfer in barrel type epitaxial reactor.
- Combined free and forced laminar convective heat transfer from isothermally heated inner tube in vertical concentric annulus.
- Particle holdup in a fast fluidized bed.
- Gas-particle heat transfer in a packed fluidized bed.
- Reaction characteristics of the horizontal Epitaxial reactor.
- Temperature distribution and reaction characteristics of the horizontal epitaxial reactor in high flow rate range.
- Velocity profile and temperature distribution in the horizontal epitaxial reactor.
- Effect of particle size on elutriation rate constant for a fluidized bed.
- Natural convective flow between heated vertical parallel plates.
- Numerical analysis of transport phenomena between heated vertical parallel plates.