スポンサーリンク
The Iron and Steel Institute of Japan | 論文
- Microsegregation of Chromium and Carbon and Ridging Phenomenon in 18 Cr Stainless Steel Sheets
- Formation of Ridging Related to the Banded Segregation Pattern of Cr and C on Ferritic Stainless Steel Sheet
- Applications of X-ray thin film diffraction method.
- Mill trial for application of accelerated cooling combined with controlled rolling to X70 linepipe steel plates.
- Evaluation of Subsurface Fatigue Damage in Strip Mill Rolls by an X-ray Diffraction Method
- Enhancement of elongation by retained austenite in intercritical annealed 0.4C-1.5Si-0.8Mn steel.
- Three-dimensional Image Analysis of Corrosion Fatigue Fracture Surface
- The Behavior of Softening and Melting of Hematite Pellet and Sinter during Heating in a Reducing Atmosphere
- The phase composition and workability of electrodeposited Fe-Zn alloy.
- Morphology of carbonitrides and hot ductility of low carbon low alloy steels.
- Manufacture of Wire Rods with Good Descaling Property
- Effect of 475.DEG.C embrittlement on fracture resistance of cast duplex stainless steel.
- Stress relaxation during hot deformation of austenite.
- Effect of Pre-strain on Stress Corrosion Cracking of Type 304 Stainless Steel in High Temperature Water
- Measurement of molten powder thickness in continuous casting mold by eddy current method.
- An assessment of thermodynamic parameters for deoxidation of molten iron by Cr, V, Al, Zr and Ti.
- Activities of Na2O in CaO-based slags used for dephosphorization of steel.
- Quantitative evaluation of the joint segregation characteristics of two alloying elements.
- Stress corrosion cracking behavior of weldments of ferritic stainless steels in high temperature pure water.
- Mechanism of formation of the V-shaped segregation in the large section continuous cast bloom.