Results of Beam Extraction Performance for the KSTAR Neutral Beam Injector

概要

論文の詳細を見る
The first neutral beam injector (NBI-1) has been developed for the Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak. The first long pulse ion source (LPIS-1) has been installed on the NBI-1 for an auxiliary heating and current drive of KSTAR plasmas. The performance of ion and neutral beam extractions in the LPIS-1 was investigated initially on the KSTAR NBI-1 system, prior to the neutral beam injection into the main plasmas. The ion source consists of a magnetic bucket plasma generator with multipole cusp fields and a set of prototype tetrode accelerators with circular apertures. The inner volume of the plasma generator and accelerator column in the LPIS-1 is approximately 123 L. Design requirements for the ion source were a 120 kV/65 A deuterium beam and a 300 s pulse length. The extraction of ion beams was initiated by the formation of arc plasmas in the LPIS-1, called the arc-beam extraction method. A stable ion beam extraction of the LPIS-1 was achieved up to 85 kV/32 A for a 5 s pulse length and 80 kV/25 A for a 14 s pulse length. An optimum beam perveance of 1.15 μperv was observed at an acceleration voltage of 60 kV. Neutralization efficiency was measured by a water-flow calorimetry (WFC) method using a calorimeter and the operation of a bending magnet. The full-energy species of ion beams were detected by using the diagnostic method of optical multichannel analyzer (OMA). An arc efficiency of the LPIS was 0.6--1.1 A/kW depending on the operating conditions of arc discharge. A neutral beam power of {\sim}1.0 MW must be sufficiently injected into the KSTAR plasmas from the LPIS-1 at a beam energy of 80 keV.
2011-06-25

Results of Beam Extraction Performance for the KSTAR Neutral Beam Injector

スポンサーリンク

概要

著者

関連論文

スポンサーリンク