Electrical Properties of Mg Doped (Ba0.5Sr0.5)TiO3 Thin Films.
スポンサーリンク
概要
- 論文の詳細を見る
The microstructures and electrical characteristics of Mg doped (Ba<FONT SIZE="-1"><SUB>0.5</SUB></FONT>Sr<FONT SIZE="-1"><SUB>0.5</SUB></FONT>)TiO<FONT SIZE="-1"><SUB>3</SUB></FONT> (BSTM) thin films were investigated as a function of Mg content. Also the multi-layered structure, BSTM/BST/BSTM was proposed to improve both of the leakage current and dielectric constant. With increasing Mg content, the perovskite peak intensity slightly decreased and grains became smaller. For the films above 15 mol% Mg, the secondary phase (MgTi<FONT SIZE="-1"><SUB>2</SUB></FONT>O<FONT SIZE="-1"><SUB>5</SUB></FONT>) was observed in X-ray diffraction (XRD) patterns. The dielectric constant decreased with increasing Mg content, while leakage current decreased up to 10 mol% Mg and then increased with further addition, which were explained by the effect of grain size and charge compensation. For the BSTM/BST/BSTM multi-layered films, the leakage current dramatically decreased without reduction of the dielectric constant when the thicknesses of BSTM and BST were 70 nm and 210 nm, respectively. These results confirm that a promising BST thin film capacitor can be obtained by introduction of Mg modified multi-layer structure.
- 公益社団法人 応用物理学会の論文
公益社団法人 応用物理学会 | 論文
- Electron Channelling Effect in an Al–Fe–Cu Quasicrystal
- Construction and Performance of a Large-Aperture Wire-Chamber Spectrometer for Pion Scattering Experiments at KEK
- Effect of Plasma Injection on Cold Wall Type MHD Generator
- Development of Scanning μ-RHEED Microscopy for Imaging Polycrystal Grain Structure in LSI
- Boundary Layer Cooling Effect on Semi-Hot Wall Type MHD Channel