ＡＤＣ１２／５０５２アルミニウム合金の摩擦攪拌接合における温度解析
スポンサーリンク
概要
- 論文の詳細を見る
Temperature analysis has been performed in friction stir welding (FSW) of ADC12 and A5052 dissimilar aluminum alloys. The temperature at the stir zone and four points on each side of the joint line was measured during FSW in various conditions. In addition, an analytical model assumed that the work generated by the rotation of the tool led to the work for stirring materials and heat generation of the material and the tool. The temperature of the stir zone (SZ) where A5052 were FSWed was about 30 K higher than that of ADC12. The temperature of SZ of the advancing side (AS) : A5052/the retreating side (RS) : ADC12 was about 30 K higher than that of AS : ADC12/RS : A5052. The flow stress of the materials in FSW was calculated based on the temperature obtained in the experiment. The analytical model could predict appropriately that the motor power consisted of the heat generated by friction and the work generated by the rotation of the tool.
- 一般社団法人 軽金属学会の論文
一般社団法人 軽金属学会 | 論文
- Mechanical and wear properties of SiC whisker/ADC12 aluminum alloy composites fabricated by die casting.
- Joining of aluminum and ceramics.
- タイトル無し
- Undercooling and solidification behavior of fluid clumps of second-poured melt of hypereutectic Al-Si alloy in Duplex Casting process.
- Change in apparent viscosity of stirred slurry during production of semi-solid hypereutectic Al-Si alloy by slurry-melt mixing process.