温間異周速圧延による６０６１アルミニウム合金の結晶粒微細化
スポンサーリンク
概要
- 論文の詳細を見る
For the purpose of grain refinement, the development of the microstructure of 6061 aluminum alloys during asymmetric warm-rolling was studied by electron backscatter pattern (EBSP) analysis, as well as optical and transmission electron microscopy, and compared with that developed during conventional warm-rolling. In asymmetrically rolled sheets to a thickness reduction of 91.8% at 300°C, new fine grains with an average size of about 1 μm are evolved almost uniformly throughout the thickness. The fraction of fine grains in asymmetrically warm-rolling sheet increased with an increase in thickness reduction and a rise in temperature, whereas for conventionally warm-rolled sheet, the usual fibrous microstructure is predominant. The evolution of new fine grains during asymmetric warm-rolling seems to be due to the subgrain formation and the development of the subgrain into fine grain promoted by a simultaneous action of two deformation modes, namely compression and additional shear deformation. However, the obvious growth of fine grains was observed during solution treatment. For suppression of such a grain growth, scandium addition to 6061 alloy is effective.
- 一般社団法人 軽金属学会の論文
一般社団法人 軽金属学会 | 論文
- Mechanical and wear properties of SiC whisker/ADC12 aluminum alloy composites fabricated by die casting.
- Joining of aluminum and ceramics.
- タイトル無し
- Undercooling and solidification behavior of fluid clumps of second-poured melt of hypereutectic Al-Si alloy in Duplex Casting process.
- Change in apparent viscosity of stirred slurry during production of semi-solid hypereutectic Al-Si alloy by slurry-melt mixing process.