Effects of cold rolling conditions on the surface residual stress in the 5083 aluminum alloy plates.
スポンサーリンク
概要
- 論文の詳細を見る
Effects of cold rolling conditions on the generation of the surface residual stress in the 5083 aluminum alloy plates were experimentally investigated. The generation behavior of the residual stress was examined in view of plate thickness, working roll diameter and one pass reduction in area. The obtained results were summarized as follows. Thicker specimens exhibited relatively higher surface residual stress in tensile manner than thinner ones. Surface residual stresses decreased with increasing the total reduction in area. The specimen rolled by large working rolls showed higher compressive stress than the specimen rolled by small rolls. The parameters of ωf and (t/l)2 which represent the geometrical conditions in the final rolling process significantly affected the generation behavior of the surface residual stress.
- 一般社団法人 軽金属学会の論文
一般社団法人 軽金属学会 | 論文
- Mechanical and wear properties of SiC whisker/ADC12 aluminum alloy composites fabricated by die casting.
- Joining of aluminum and ceramics.
- タイトル無し
- Undercooling and solidification behavior of fluid clumps of second-poured melt of hypereutectic Al-Si alloy in Duplex Casting process.
- Change in apparent viscosity of stirred slurry during production of semi-solid hypereutectic Al-Si alloy by slurry-melt mixing process.