On the serrated flow of Al-Cu solid solution alloys
スポンサーリンク
概要
- 論文の詳細を見る
Tensile tests were performed on Al-0.5 at.%Cu and Al-1 at.%Cu solid solution alloys. The effects of temperature and strain rate on the serrated flow were investigated. The relation of ε∝ε02.1 was obtained at temperatures below 22°C, in which ε is the strain rate and ε0 is the strain at the start of serrated flow. At these temperatures, the value of activation energy for vacancy migration obtained was O.5 eV. The form of the serrated flow was different at between the temperatures of above and below 22°C. When the flow stress was plotted as a function of temperature, the peaks on the curves appeared at about 50 and 75°C for Al-0.5 at.%Cu and Al-1 at.%Cu alloys, respectively. The temperature at which change in the form of the serrated flow occurred corresponded with that at which the flow stress began to increase with the rise in temperature.
- 一般社団法人 軽金属学会の論文
一般社団法人 軽金属学会 | 論文
- Mechanical and wear properties of SiC whisker/ADC12 aluminum alloy composites fabricated by die casting.
- Joining of aluminum and ceramics.
- タイトル無し
- Undercooling and solidification behavior of fluid clumps of second-poured melt of hypereutectic Al-Si alloy in Duplex Casting process.
- Change in apparent viscosity of stirred slurry during production of semi-solid hypereutectic Al-Si alloy by slurry-melt mixing process.